Installation Guide

Read
Post-wash Usage guide
Please connect power plug of the machine
to the designed electrical 220V socket
separately. Do not attach to adapters.
Don’t place the machine in the bathroom or other
damp place, and do not put the wet clothes on the
operation board. This may let water into the PCB
board which may cause an electrical fire.
Please ensure that the vents at the bottom of the
machine are well ventilated. Take care especially
when placing machine on the carpet.
Don't wash raincoats or waterproof clothing, such
as a bicycle covers etc. This will cause such items
to be damaged.
Don't share a socket with other appliances.
If the power plug is damaged or the socket is loose, please
do not use and have it repaired by a professional.
Do not use water at a temperature of more
than 50℃.
When the machine is in normal use, please
keep the machine plugged in. During a power
outages or if the machine is not being
intended for use, it should be unplugged and
the water tap turned off. Please don't unplug
or plug the machine with wet hands.
Do not obstruct the power cord, damaged the power cord, put any items
on top of the power cord or bend the cord to improper angles.
When the power cord or power plug is damaged, it must be repaired by
specialist maintenance. Tampering with the cable will void all guarantees.
Grounding
Each month please clean the Impeller filter to ensure the best performance.
During clean up, please unplug the power plug from the socket