Installation Guide

Installation

9) Use a Spirit Level Ruler to measure whether the hood is in a

horizontal level, and use two 0.16"*1.18" Screws to lock into the

safety hole position of the hood (not mandatory, according to user's

wishes to choose whether to lock).

NOTE:

 Make sure you remove the tape on the damper and check if the

damper opens and closes freely, otherwise it make noises, and the

range hood will be shaking.

10) Tear off the tape from the air outlet.

Spirit Level Ruler

0.16"*1.18" Screws

Tape

COMPONENTS:

Part 2: 0.16"*1.18"Screws X 2