Bring in an image from Corp Comm at 300 DPI and then shrinkwrap the anchored frame (ESC + m + P).
Jeppesen FliteDeck Pro User Guide Jeppesen 55 Inverness Drive East Englewood, Colorado 80112-5498 This document supports version 8.1 of Jeppesen FliteDeck Pro. Minimum operating system requirement for Jeppesen FliteDeck Pro 8.1 is Windows 8.1. Copyright © 2014 Jeppesen. All rights reserved. August 2014 Revision 1.
Copyright © 2014 Jeppesen. All rights reserved. Except as otherwise provided and authorized in a written agreement between both Jeppesen and your company, Jeppesen's copyrighted information and materials may not be processed, reformatted, reproduced, stored in a retrieval system, or transmitted in whole or in part, in any form or by any means, whether electrical, mechanical, photocopying, recording or otherwise, without prior written permission of Jeppesen.
Contents Jeppesen FliteDeck Pro User Guide 1 Jeppesen Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Working in Enroute View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Working in Terminal Charts View . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Displaying the Ownship Symbol on the Enroute Map . . . . . . . . . . . . . . . . . . . . . . . Viewing Present Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viewing Enroute Map Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viewing Map Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 18 19 20 Searching in Enroute View . . . . . . . . . . . . . .
Jeppesen FliteDeck Pro User Guide Jeppesen Support North America Toll Free: 800-978-9186 United States: 303-328-6175 International: +49-6102-508290 Email: techsupport@jeppesen.
The Views Working in Enroute View The Views Jeppesen FliteDeck Pro helps you increase your situational awareness by viewing your flight with respect to both the terminal and enroute air structures. The two main views in Jeppesen FliteDeck Pro are the Enroute view and the Terminal Charts view. You enter origin, destination, and any alternate airports in the Enroute view, and then you retrieve the terminal charts for those route airports in the Terminal Charts view.
Basic Touch Screen Gestures Pinch to Zoom Basic Touch Screen Gestures Pinch to Zoom Zoom in and out of the display by moving your thumb and finger in a pinching gesture. Touch, Hold, then Release You can touch, hold, and then release any object on the enroute map to view more information about it. For certain types of objects, you can add them to your route or, if they are already part of the route, remove them from the route.
The Toolbar Two-finger Swipe to Navigate Through Terminal Charts The Toolbar Jeppesen FliteDeck Pro User Guide August 2014 Copyright © 2014 Jeppesen. All rights reserved.
The Toolbar Specifying Which Manuals are Available for View Specifying Which Manuals are Available for View Your organization determines which manuals are delivered to your device. However, before you can access and view the manuals, you must first specify which manuals you want to have available when you tap the Manuals button. To specify which manuals are available: 1. Tap the Settings button. 2. Tap Updates. 3. Tap the Manuals flyout.
The Toolbar Viewing Selected Manuals Viewing Selected Manuals After you have specified the manuals that you want to have available, you can view them at any time, in either Enroute view or Terminal Charts view. You must have a PDF reader app installed on your device to view manuals. To view selected manuals: 1. Tap the Manuals button. 2. Tap to select the manual that you want to view. 3. Tap to select the PDF reader app of your choice. The manual opens in snap view.
The Toolbar Adjusting Brightness and Night Theme Adjusting Brightness and Night Theme To adjust the display brightness: 1. Tap the Brightness button on the FliteDeck Pro toolbar. 2. Tap Adjust Screen Brightness. The Settings flyout appears. 3. Tap Screen. 4. Slide the brightness control to decrease or increase the display brightness. To adjust for optimal viewing in low-light conditions, switch the Night Theme to On.
The Toolbar Accessing Settings Accessing Settings From the Settings popover, you can do the following: • Perform updates. See “Performing Updates” on page 9 for more information. • View app help. • Reset all user settings to their default values. • Clear routes and custom content. • Turn Sleep Mode On or Off. • Enable the moving map and display the ownship symbol on either the enroute map or on terminal charts. • Show or hide the terrain legend on the enroute map.
The Toolbar Performing Updates Performing Updates When data updates are available, a badge appears on the Settings button. To perform updates: 1. Tap the Settings button. 2. To view available updates, tap the Updates button. 3. Tap Update at the bottom of the dialog box. IMPORTANT During the update process, avoid disabling your WIFI or Internet connection, and avoid placing your device in Airplane mode. Doing so interrupts the update and can cause unpredictable results. 4.
The Toolbar Performing Updates Midcycle Terminal Chart Updates Jeppesen FliteDeck Pro updates terminal charts according to your company’s subscription. When a terminal chart is revised midcycle, the revision date appears along with the amber tag next to the chart title on the chart list. To change terminal chart versions when more than one version of the chart is available: 1. Tap the amber tag from the chart list. The Chart Versions popover appears. 2.
The Toolbar Locking the Display Locking the Display The display lock feature locks the current view so that you don’t accidentally pan or zoom away from information you need—for example, during critical phases of flight. To lock or unlock your display: • Tap the Display Lock button. When you lock the display, the Display Lock button is orange. All other app buttons are disabled, as are the panning and zooming features. Locking the display also locks the current orientation.
Enroute View Locking the Display Enroute View IMPORTANT Although the Enroute view displays navigational data and an ownship symbol, it is designed to enhance situational awareness and is not intended as a navigational tool. Use other tools on the flight deck to navigate the aircraft. Jeppesen FliteDeck Pro User Guide August 2014 Copyright © 2014 Jeppesen. All rights reserved.
Enroute View Creating a Route from the Route Drawer Creating a Route from the Route Drawer You can plan, create, and edit your route from the Route Drawer, including adding multiple alternate airports, route points, and SIDs and STARs. To create a route using the Route Drawer: 1. Tap the Route Drawer Bar. The app opens the Route Drawer. 2. Tap in the Origin box and enter the four-letter ICAO identifier or city name for the origin airport. 3.
Enroute View Adding Route Points from the Route Drawer Adding Route Points from the Route Drawer You can add route points (navaids, airways, airports, and waypoints) to your route from the Route Drawer. To add route points to your route: 1. Tap the Route Drawer Bar, which opens the Route Drawer. 2. Tap in the Route box. 3. Using the keyboard, or by copying and pasting, enter the route points into the route box. 4. Dismiss the keyboard. Use dot notation to enter multiple sequential waypoints.
Enroute View Adding a SID and a STAR Adding a SID and a STAR You can add a SID and a STAR to your route. Departure and arrival procedures are depicted as a dotted line on the enroute map. Before you can enter a SID or a STAR, you must first enter the corresponding origin and destination airports. To enter a SID or a STAR: 1. Open the Route Drawer. 2. Tap either SID or STAR, and then follow the prompts to enter runways, procedures, and transitions.
Enroute View Editing a Route by Interacting with the Map Editing a Route by Interacting with the Map You can add or remove route points from your route directly from the map—without having to enter or delete information in the Route box. For example, you can add established navaids, established waypoints, and airports. NOTE Although airways are depicted on the Enroute map, to include an airway segment in your route, you must use dot notation to designate the airway in the Route Box.
Enroute View Viewing High and Low Enroute Themes corresponds to the point on the map where you touched. Follow the prompts to add the waypoint in the correct sequence in your route. 2. Tap Add To Route or Remove From Route. NOTE You can tap the unfilled star next to a user-created waypoint to fill the star and to ensure that the waypoint persists on the map after the route has been cleared. You can clear the user-created waypoint by tapping the star again.
Enroute View Displaying the Ownship Symbol on the Enroute Map Displaying the Ownship Symbol on the Enroute Map The ownship symbol shows the present position of the aircraft on the Enroute moving map. The ownship symbol is available on the enroute map when both Enable Moving Map and Display Ownship on Enroute are set to On in JeppFD-Pro app settings and the minimum GPS accuracy requirement is met.
Enroute View Viewing Enroute Map Features Viewing Enroute Map Features Depending on the zoom level, certain enroute map features are automatically filtered to declutter the map. When a feature is available for display, you can manually show or hide it by tapping on its corresponding filter button. To show or hide an enroute map feature: 1. Zoom in until the map feature that you want to view is enabled.
Enroute View Viewing Map Details Viewing Map Details To view map details: • Touch, hold, and then release an object on the map. The selected object is highlighted in magenta, and a popover displays the object detail. Depending on the type of object that you select, you might have the option to review more information about the object. For example, when you view the details of an airport on the map, a popover displays airport information, including: • Information about runways.
Enroute View Searching in Enroute View Searching in Enroute View To search for map information: 1. Tap the Search button. 2. Type two or more characters in the search box. 3. Tap the Search icon next to the search box or tap the Search key on the virtual keyboard. FliteDeck Pro lists the objects that match your criteria, ordered from closest to farthest from the center of the map.
Enroute View Viewing Distance Calculations Viewing Distance Calculations The distance-measuring tool is a set of rings or arcs that provide constant awareness of the relative distance between features on the map at a glance. These rings are called range rings. As you zoom in or out of the map, the range rings change with the map scale. To show and hide range rings: • Tap the Range Rings button. The center-most ring includes a compass rose that indicates true north, south, east, and west.
Enroute View Accessing Enroute Operational Notes Accessing Enroute Operational Notes All of the enroute notes that are provided on precomposed (paper) charts are available in FliteDeck Pro: • Operational: Tactically important information regarding specific navigation elements. These notes are equivalent to Ball Flag notes on paper charts and are indicated visually on the enroute map by blue “i” icons. • Regional: Procedures, conditions, or requirements for a specific geographical region.
Terminal Charts View Removing Current Flight Information Terminal Charts View Jeppesen FliteDeck Pro User Guide August 2014 Copyright © 2014 Jeppesen. All rights reserved.
Terminal Charts View Accessing Terminal Charts for Your Route Accessing Terminal Charts for Your Route Terminal charts are organized by chart type categories. You can tap a chart type button to display charts in a category. The chart type buttons are as follows: • REF (Reference)—Nonprocedural charts, sorted alphabetically by title. • CO (Company): If you subscribe to Jeppesen Tailored Charting Services, you can access the Company category, which includes your company’s tailored charts.
Terminal Charts View Selecting Charts for Your Flight Selecting Charts for Your Flight You can select multiple charts for easy access during critical phases of flight. To begin selecting charts: 1. Tap the Chart Type button for the type of chart that you want to view. You can tap the chart title to preview the chart before selecting it. FliteDeck Pro adds a blue border around the chart title and displays a thumbnail image of the chart. 2.
Terminal Charts View Viewing Charts for Airports in Your Route Viewing Charts for Airports in Your Route After you create a route in the Enroute view, the first time that you tap the Terminal Charts view button, the default airport diagram appears for the origin airport. To view other chart types for the origin airport, tap a Chart Type button for the category of charts that you want to view.
Terminal Charts View Working with Hand-Drawn Notes Working with Hand-Drawn Notes You can overlay a semitransparent yellow note onto a terminal chart to draw attention to specific information. The note remains associated with the chart until you delete the note or until the chart is updated. To add a note to a terminal chart: 1. Tap the Note button and use your finger as a pen. 2. To erase note entries, tap the Undo button. 3. Tap the X in the upper right corner of the note to dismiss the note.
Terminal Charts View Highlighting a Chart Highlighting a Chart To highlight information on a terminal chart, tap the Highlight button. In highlight mode, your finger acts as a highlighter pen on the chart. To exit Highlight mode, tap the highlight button again. To undo the most recent highlight, tap the Undo button. Continue to tap the Undo button to remove highlights in the reverse order they were created. To delete all highlights: 1. Tap the Trashcan button. 2. Tap Clear All.
Terminal Charts View Displaying the Ownship Symbol on the Airport Diagram Displaying the Ownship Symbol on the Airport Diagram The ownship symbol shows the present position of the aircraft on the airport diagram. Ownship position appears on the airport diagram when: • Your device has GPS functionality. • The aircraft is within the boundaries of the airport diagram. • Display Ownship on Airport Diagram is set to On in JeppFD-Pro app settings.
Jeppesen FliteDeck Pro App Settings Updates, Application Help, and Reset Features Jeppesen FliteDeck Pro App Settings To access the JeppFD-Pro app settings: • Tap the Settings icon near the top right corner of any FliteDeck Pro screen. Updates, Application Help, and Reset Features The Updates flyout provides options to update application data and manuals. Help accesses the FliteDeck Pro User Guide. You must have a PDF reader app installed on your device.
Jeppesen FliteDeck Pro App Settings Sleep Mode Setting Sleep Mode Setting Sleep Mode is On by default. When Sleep Mode is on, the device settings control whether and when the device enters sleep mode. If your device settings permit the device to enter sleep mode, turning the Sleep Mode to Off in FliteDeck Pro overrides the device settings as long as FliteDeck Pro runs in the foreground. If you switch to another app, the device settings apply, and the device enters sleep mode according to those settings.
Jeppesen FliteDeck Pro App Settings Enroute View Settings Enroute View Settings These settings control the display of the Enroute view. The Enroute View settings are set to Off by default. • To turn on the moving map, switch Enable Moving Map to On. The enroute map now moves under your present location. With the moving map enabled, you can track your aircraft along its route of flight, recenter the enroute map over your present position, and view the enroute map in Track Up orientation.
Jeppesen FliteDeck Pro App Settings Terminal Charts View Settings Terminal Charts View Settings These settings control the display of the Terminal Charts view. • To display ownship position on the airport diagram, switch Display Ownship on Airport Diagram to On. This setting is Off by default. • To display the airport diagram automatically upon landing, switch Show Taxi Diagram on Landing to On.
Jeppesen FliteDeck Pro App Settings Support Information and Deactivation Information Support Information and Deactivation Information The Jeppesen Support flyout displays contact information for the Jeppesen support team. To remove all Jeppesen data and clear the activation information (including the site key), switch Deactivate to On, and then relaunch the application. IMPORTANT When you deactivate the application, you can still run it in Demo mode.
