Owner's Manual
Table Of Contents
- Installation / Quick Start Guide (Downloaded from Jensen)
- Installation Guide (Supplied with Product)
- Operation Manual
- Reset
- Bluetooth PIN (5309)
- Table of Contents
- Features
- Parts & Controls
- Remote Control
- External Devices
- Quick Start Guide
- Equalizer Control Menu
- System Settings
- Disc Operation
- Tuner Operation
- USB Operation
- iPod / iPhone Operation
- AV-In1 / AV-In2 Operation
- Bluetooth Operation
- Rear Camera Operation
- Steering Wheel Control Operation
- Pandora Operation
- SiriusXM Operation
- Troubleshooting
- Care and Maintenance
- Specs
- Warranty
64
VX4025
36
SWC Ready
The built-in SWC Interface is compatible with PAC steering wheel control
modules. The PAC SWI-RC is recommended.
A third-party adapter must be used in order for the VX4025 to be compatible
with any steering wheel controls.
The following controls are available for most vehicles:
1. Volume
Up (+)
4.
Seek /
Track +
7. Preset (+) 10. BT Send
2. Volume
Down (-)
5. 8. Preset (-) 11. BT End
3. Mute 6. Source Band9.
12
.
PT
T
Note:
Not all OE steering wheel functions may be supported by the VX4025. PTT -
Will activate Siri / Google Voice if mobile phone supports the feature. Not
compatible with all phones/vehicles.
PAC SWI-RC Installation Hints
1.
. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Other/Sony".
2..
Pro
gramming - Use the Pioneer/Sony/Other radio function mapping order for
Jensen branded head units.
3.. When programming the SWI-RC, if a function is not supported (or not desired),
then the function MUST be skipped as per the PAC SWI-RC instructions.
4..
The SWC function MUST be programmed in the correct order per the PAC
SWI-RC radio function mapping order instructions.
Seek
/
Track -