Owner's Manual
Table Of Contents
- Installation / Quick Start Guide (Downloaded from Jensen)
- Installation Guide (Supplied with Product)
- Operation Manual
- Reset (Button #6)
- Bluetooth PIN (5309)
- Table of Contents
- Features
- Parts & Controls
- Remote Control
- Using the TFT Monitor
- External Devices
- Quick Start Guide
- Equalizer Control Menu
- System Settings
- Disc Operation
- Tuner Operation
- USB Operation
- iPod / iPhone Operation
- AV-In1 / AV-In2 Operation
- Bluetooth Operation
- Rear Camera Operation
- Steering Wheel Control Operation
- Pandora Operation
- SiriusXM Operation
- Care and Maintenance
- Specs
- Warranty
16
VX4012
System Settings Adjustment
To access and adjust system settings:
1.
Touch the Settings (
) icon on the Main Menu screen to enter the SETTINGS
MENU. Sub-menus where adjustments can be made will be highlighted.
Audible Beep Confirmation
An audible beep tone confir
ms each function selection. The beep tone can be
disabled through the Setup menu
.
Muting the Audio
Press the front panel Rotary Volume ( ) knob / Mute button to mute the audio
from the unit. Mute icon is displayed on the LCD screen. Press the Rotary
Volume ( ) knob / Mute button again to restore the audio volume to its
previous level. Adjusting the volume or using any of the audio setup features
cancels the mute function.
Equalizer Controls
Equalizer (
EQ): Adjustment can be made after entering one of the audio/video
sources (Disc, Radio, USB, AV-IN or SXM).
Touch the Equalizer (
EQ) icon to view the Equalizer Control Screen to select a
desired preset setting (Optimal, Classic, Rock, Jazz,
Techno or Pop), Flat setting,
custom User setting, make adjustments to the audio Balance and Fade levels or to
turn the Loudness option ON or OFF. Touch the SRC icon to return to the current
source.
Volume Adjustment / Turn On Volume
To increase or decrease the volume level, rotate the
rotary encoder knob. The
unit’s front panel screen will display the volume level for 2 seconds. The
volume level ranges from 0 to 50.
To set the Turn-On volume, press and hold
the rotary encoder knob 1 second while the green volume bar is displayed
after setting the desired volume level. You will hear 2 beeps to confirm the
new Turn-On volume level.