VX5228 INSTALLATION/OWNER’S MANUAL Multimedia Receiver with Bluetooth ® featuring a 6.
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
VX5228 PREPARATION Table of Contents Page Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation/Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . .
VX5228 PREPARATION WARNING Upon installation of this monitor/media player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
VX5228 PREPARATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your JENSEN VX5228 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. To prevent damage or injury: • Make sure to ground the unit securely to the vehicle chassis ground. • Do not remove the top or bottom covers of the unit.
VX5228 INSTALLATION Preparation Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve. • Install mounting sleeve into opening, bending tabs to secure.
VX5228 INSTALLATION Wiring Diagram - Inputs/Outputs Note: When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 10 amp ATM mini style fuse located on the power connector. Wiring Notes: Subwoofer output The Subwoofer preamp audio output (black jacket with green RCA) is active in all audio modes. Rear camera input A rear view camera (not included) can be used with the Camera input.
VX5228 OPERATION Control Locations 1 2 3 4 5 1 17 16 1 Mode 4 IR Remote Sensor 2 Power / Volume / Mute 5 Reset 3 Siri 2 3 1 Mode 2 Volume Up 3 Power 4 Tune / Track Up 5 Siri 5 6 Band 6 7 Volume Down 8 Preset 3 9 Preset 2 / Random 10 Preset 6 11 Preset 5 12 End Call 13 Bluetooth Talk 14 Preset 4 / Play / Pause 15 Preset 1 / Repeat 16 Mute 17 Tune / Track Down 4 7 15 8 9 14 10 11 13 7 12
VX5228 OPERATION Remote Control Preparation Remove battery insulation tape . Notes: • The remote control uses one 3 volt Lithium CR2025 battery. Remove the battery if the remote will not be used for a month or longer. • Remove and dispose of battery properly. • Do not store battery with metallic objects or materials. To insert or replace the battery, remove the battery holder. Remove the battery from the battery holder. Install the new battery. Make sure to keep the (+) side up.
VX5228 OPERATION General Operation Power On/Off Volume Momentarily press unit off. to turn the unit on. Press and hold to turn the Rotate the volume knob to increase or decrease the volume level. Mute Momentarily press MUTE to silence the audio. Momentarily press MUTE again to return to the previously selected volume. Rotating the volume knob while the volume is muted will also cancel the mute function.
VX5228 OPERATION General Operation Setup Menu From the Main Menu screen, select Settings to access the Setup menu and select from eight categories represented by the icons on the top of the screen: System, Fader/Balance, Equalizer, Surround, Supwoofer, Display, Time Settings and Miscellaneous. Select the category, and adjust any of the available options using the touch screen. System: • Displays information on Model, SW Version and BT version. • Reset Bluetooth Settings or Reboot System.
VX5228 OPERATION AM/FM Tuner Operation 1 2 3 4 5 9 10 11 6 7 8 Radio Operation Main Menu 1 Current Mode Indicator 2 Local / Distance 3 Press to return to Main Menu screen. Displays current mode of operation. Press to toggle between Local and DIstance tuning. PS 4 Press to scan presets and listen to the first 10 seconds of each. Press again to stop scanning and listen to the station. Presets List 5 Press to access all preset stations for all AM or FM bands.
VX5228 OPERATION USB Operation 1 2 3 4 USB Main Menu 1 Current Mode Indicator 2 List 3 Repeat 4 5 6 7 8 To play audio files from a USB device, connect a device to the rear USB cable and playback will begin automatically. To return to USB playback from another mode of operation, select the USB icon in the Main Menu. Press to return to Main Menu screen. Displays current mode of operation. Press to access a list of all files and folders on the device.
VX5228 OPERATION Media Compatibility File Type File System FAT MP3 FAT 12 X FAT 16/FAT 32 .mp3/.MP3/.Mp3/.mP3 File Extension MPEG Format Sampling Frequency Bitrate Other Information MP3 ID3 TAG .rmp/.m4a X MPEG 1 MPEG 2 MPEG 2.5 MPEG 1 32/44.1/48kHz MPEG 2 12/16/22.05/24kHz MPEG 2.5 8/11.025/12kHz MPEG 1 32 ~ 320kbps MPEG 2 8 ~ 160kbps MPEG 2.
VX5228 OPERATION Media Compatibility Media Compatibility Playback Order Compatible Recording Formats Notes The following types of files are not compatible: • WMA files that are protected by DRM (Digital Rights Management) • WMA lossless format • MP3 PRO format, MP3 playlists • RMP format • WAV format • WMV format • AAC, protected AAC, M4A format MP3 playback sequence begins in the root folder of the USB device. Any empty folders or folders that do not include MP3/JPG files are skipped.
VX5228 OPERATION Bluetooth Operation 1 2 4 3 5 Preparation Before you can use a Bluetooth device, it must be paired and connected. Make sure that Bluetooth is activated on your device before you begin the pairing process. Pairing a New Device The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details. The device name is "VX5228".
VX5228 OPERATION Bluetooth Operation 6 7 8 Bluetooth Talk 6 Bluetooth Music 7 Backspace 8 Clear 9 End Call 10 Previous File / Track 11 Play / Pause 12 Next File/Track 13 9 10 11 12 13 Press to connect a call. Press to transfer audio between the unit and mobile phone. When dialing, press to erase the last digit. When dialing, press to clear all digits entered. Press to end a call. Press to go back to the previous file or track. Press to pause or resume playback.
VX5228 OPERATION iPod Operation 1 2 3 Connecting an iPod 4 5 6 7 Connect an iPod to the unit's rear USB input, and the unit will automatically begin iPod playback. To return to iPod playback from another mode of operation, select the iPod icon in the Main Menu. Note: iPod mode cannot be accessed while the CarPlay feature is enabled. The unit will automatically launch CarPlay, and iPod mode cannote be accessed from the Main Menu.
VX5228 OPERATION Apple CarPlay Operation Apple CarPlay™ is a smart interface for iPhone, allowing you to voice-control (via Siri) music, navigation, phone and messaging apps - significantly reducing driver distraction. Phone - Use Siri to make calls, return missed calls, listen to voicemail messages, and view the caller ID on the receiver’s screen. Messages - Ask Siri to send, read, and reply to text messages.
VX5228 OPERATION Apple CarPlay Operation When the CarPlay menu is displayed, the home button in the lower left corner work just like the home button on your iPhone. Press and hold it to summon Siri and begin your voice commands. At any time during CarPlay operation, you can press this button momentarily to return to the main CarPlay menu screen. Press any Application button on the main CarPlay menu to access that operation directly.
VX5228 OPERATION Rear RCA Aux Input Auxiliary Input Connect an optional audio source into the RCA (rear) input. Select auxiliary input from the Main Menu to listen to audio. Adjust volume on the external audio source as needed (if connected to the headphone output of the device). Rear Camera Operation - (Optional) Using Rear Camera Connect an optional rear camera to the Camera Input (Black RCA connector). Refer to the wiring diagram for details.
VX5228 OPERATION SWC Input Operation The built-in SWC Interface is compatible with PAC steering wheel control modules. The PAC SWI-RC is recommended. A third-party adapter must be used in order for the VX5228 to be compatible with any steering wheel controls. The following controls are available for most vehicles. 1. Volume Up (+) 4. Preset (+) 7. Seek/Track Up (+) 10. BT Talk 2. Volume Down (-) 5. Preset (-) 8. Seek/Track Down (-) 11. BT End 3. Mute 6. Mode 9.
VX5228 OPERATION Troubleshooting General Problem Unit will not turn on (no power) Unit has power (but no sound) Unit blows fuse(s) Unit has audio (but no video) IR remote does not work Cause Action Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse(s) Speaker wires not connected Check connections at speakers One or more speaker wire
VX5228 OPERATION Specifications FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 10dBf 50dB quieting sensitivity: 20dBf Stereo separation @ 1kHz: 38dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 24uV Frequency response: 30Hz-2.3kHz Front USB Compatibility: High Speed USB 2.0 USB Class: Mass storage class Monitor Panel size: 6.
VX5228 OPERATION Limited Two Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of two years from the date of the original purchase. Dual Electronics Corp.
Dual Electronics Corp. Toll Free: 888-921-4088 www.jensenmobile.com ©2018 Dual Electronics Corp. All rights reserved. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Namsung is under license. Other trademarks and trade names are those of their respective owners.
