Radio User Manual

VM9324

16. BAND: Change between XM1, XM2 and XM3 bands

17. : View the SETUP menu

18. Touch this area to view the SOURCE MENU and select a new playback

source

19. MEM: View screen used to enter current channel into preset memory

20. PTT: Activate the Push To Talk voice recognition feature. See “iPod

Voice Control” on page 16.

21. LOUD: Turn the loudness feature on/off

Displaying the Identification (ID) Code

Before you listen to satellite radio, you must subscribe to the service using

your radio’s identification number. To display the radio ID, touch the CH- or

CH+ buttons on the screen repeatedly to tune to channel “000”. The screen

displays the radio ID where the channel name is usually displayed.

Selecting a Station

Touch the CH- or CH+ buttons on the screen to select a different station.

Preset Mode

To enter preset mode, touch the BAND button on the screen or remote control

(20) to change between the following bands: SAT1, SAT2, or SAT3 (indicated

in the top left corner of the TFT screen).

Six numbered preset buttons store and recall stations for each band. All six

stored stations (P1-P6) for the current band appear on the TFT screen.

Table 9: XM Radio Remote Control Functions

|| / BAND

Select SAT1, SAT2, SAT3 band

Previous channel

Next channel

Browse category

1-9, 0

Direct entry

EQ Access equalizer menu

GOTO Access direct entry keypad

PTT Push to talk