Radio User Manual

VM9324

NOTE: You can press and hold to drag the “Source Menu” icons and

rearrange them based on your preference

External Devices

External peripheral devices, including a game console, camcorder, navigation

unit, iPod, Zune, etc. can be connected to this unit via RCA output using the

A/V Media Adapter Cable (included).

Connect the external device to the A/V Media Adapter Cable and then plug the

cable into the A/V INPUT connector (6) on the front of the radio. Select “AUX

1” mode to access the front A/V input or “AUX 2” mode for the rear aux input.

You cannot directly control external devices connected to the A/V INPUT. For

information regarding the use of USB/SD devices, see “Inserting a USB

Device” or “Accessing an SD Card” on page 42.

Micro SD Slots (for service use only)

The micro SD slot, located in the upper right corner of the front panel, cannot

be used for file playback. This input is for use by service professionals only for

software updates.

Volume Adjustment

Volume Increase/Decrease

To increase or decrease the volume level, turn the rotary encoder (1) on the

front panel or press the VOL-/+ buttons (15, 16) on remote control. When the

volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment

limit has been reached. The LCD or TFT screen displays the volume level for 3

seconds.

EJECT

A/V

INPUT

3.5mm A/V Cable (not included)

Video

Left Audio

Right Audio

Ground