Operation Manual
40
5. At this point a prompt stating that pairing is successful should appear.
Another prompt should appear asking connect to the unit, Yes or No. Press
Yes. The mobile phone and the unit should connect. The mobile phone should
display a message similar to “Device Connected.” The mobile phone and the
unit are now connected.
When successfully paired, “BT AUDIO” and the Bluetooth symbol appears
on the display panel.
Note: If pairing fails, try to pair again within several seconds. Refer to the mobile
phone’s instruction manual. Delete the device that you just searched for and
re-pair again.
Note: During pairing, only the (Release) button, volume up/down buttons /
and MUTE button are functional. The other buttons are disabled during
pairing mode.
Note: If you want to exit pairing mode while pairing, press and hold the MODE/
PAIR button until “PAIR END” appears on the display panel.
Auto-Reconnection
This unit has a built-in auto-reconnection function. In some conditions, the unit
will auto reconnect with the mobile phone (note: the mobile phone must have
been paired with the unit before.)
Before dialing, you need to conrm that the Bluetooth symbol appears on the
display panel within ten seconds of the following conditions:
• When you turn o the unit and then turn it on again.
• Switch o the ACC wire and switch it on again.
• Press the (release) button to release the front panel and install the
panel again.
If you press the button, ‘NOT PAIR’ may appear on the display panel. You can
wait for several seconds to let the unit reconnect automatically or press and hold
the CONNECT button for several seconds to reconnect. During reconnection, the
display panel will show “CONN TRY” several times and then show “CONN OK” if the
connection is successful.
Displaying the Telephone Menu
1. When pairing is successful, press and hold the DISP button on the front panel
enter the telephone menu.
2. Keep pressing the DISP button or press the or buttons to select the
items in this menu. The items will be displayed in the following sequence:
RECEIVED DIALED MISSED MANU ANS TALK XX.
The telephone menu items are listed below:
• RECEIVED: Displays the calls you have received.
Rotate or press the volume knob to scan the last received numbers. Press
the button to dial the number.