Operation Manual

26
6. TA SEEK/ALARM (Trac announcements seek/alarm)
Rotate the volume knob to set TA SEEK or TA ALARM.
• TA SEEK: When the TA function is activated, the unit searches for a station
with trac announcements.
• TA ALARM: No automatic station search. The unit sounds a beep tone if
no trac information is received and “NO TP/TA” is displayed. “SEEK PI” is
displayed if the selected station does not transmit an RDS signal.
7. TA VOL
Rotate the volume knob to adjust the trac announcement volume value.
Loudness
Loudness automatically alters the frequency response curve of audio to make it
sound more natural when played at a lower volume level.
To Turn Loudness On or O:
1. Press the volume knob briey to enter the sound adjustment mode.
2. Press the volume knob briey again until LOUD (Loudness) is selected.
3. Rotate the volume knob clockwise or counter-clockwise to turn loudness on
or o.
Changing the Display Panel Information
Press the DISP button change the information appearing on the display panel. The
unit will display AM/FM frequency information, time, program type information (if
the radio is tuned to FM frequencies) or track information (during MP3 playback).
Setting the Clock
1. Press and hold the volume knob to enter system setting mode.
2. Press the volume knob briey again until “HOUR 12H” or “HOUR 24H” appears
in the display panel.
3. Rotate the volume knob to select 12 or 24 hour time format.
4. Press the volume knob. The hours ash.
5. Rotate the volume knob to change the hours.
6. Press the volume knob. The minutes ash.
7. Rotate the volume knob to change the minutes. The display panel will return
to the normal indication 5 seconds after the time is set.