Operation Manual

11
MP1514BT
DIN Rear Mount (Method B)
Note: The outer trim ring, sleeve and the metal strap are not used for method B
installation.
If your vehicle is a Nissan or Toyota, follow these mounting instructions:
1. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the
unit to fasten the unit to the factory radio mounting brackets supplied with
your vehicle.
Side View showing
Screw Holes marked
T, N
2. To fasten the unit to the factory radio mounting brackets, align the screw
holes on the bracket with the screw holes on the unit, and then tighten the
screws (5x5mm) on each side.
Dashboard or Console
Screw
Factory Radio
Mounting Bracket
Screw