VM9020TS Operation Manual
CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9020TS Mobile Multimedia DVD/MP3/WMA Receiver for maximum enjoyment. Opening/Closing the TFT Video Screen .................................................................... Insert/Eject Disc ........................................................................
VM9020TS PREPARATION Congratulations on your purchase of the Jensen VM9020TS Mobile Multimedia AM/FM/DVD Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9020TS installed by a reputable installation shop. Features • • • • • • • • • • • • • • • • • • • • • • • ISO Double-DIN chassis Light weight proprietary DVD core mechanism Wide screen (16:9) 6.
VM9020TS INSTALLATION This unit is designed to fit into a 2.0 DIN dashboard opening, found in many imported cars. The unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialty shop for assistance on this type of installation. 1. 2.
VM9020TS WIRING <(//2: V,'(2 OUT Additional Rear Monitor :+,7( :LUHOHVV +HDGSKRQH HEADPHONE MULTIZONE 5(' HEADPHONE MULTIZONE Multizone Video MILTIZONE VIDEO <(//2: )5217 / 5DGLR $XWR $QWHQQD $8; ,1 9,'(2 $17 &217 %/8( *5((1 <(//2: 79 $QWHQQD %$77(5< 3 &217 5HDU 9LHZ 9LGHR &DPHUD *HDUER[ 6ZLWFK NOTE: The white multipin connector will not be used in every installation. In this case, it can be cut-off and discarded. This will not void any warranty that the unit may have.
VM9020TS CONTROLS AND INDICATORS 1. POWER/MUTE Press the POWER/MUTE button (1) once to turn the unit on. Press again to mute the volume. Press and hold to turn the unit off. 2. AUDIO/LOC Press the AUDIO/LOC button (2) to access the audio menu and change and/or confirm audio settings. Press and hold to activate or deactivate the Local (LOC) setting. 3. VOL + Press to increase the volume. 4. VOL Press to decrease the volume. 5.
VM9020TS CONTROLS AND INDICATORS 21. Disc Slot 22. Eject Button • Press once to eject the disc. • Press and hold to reset the mechanism. 23. Disc Indicator 24. SD Card Slot 25. Reset Button (see page 4).
VM9020TS FRONT ZONE REMOTE CONTROL Table 1: Front Zone Remote Control Functions Button Name Function Ref # DVD VCD MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title MUTE/ 4 Turns the power on. Toggles on/off audio output. Press and hold to turn the power off. Turns the power on. Toggles on/off audio output. Press and hold to turn the power off.
VM9020TS Table 1: Front Zone Remote Control Functions Button Name Function Ref # DVD VCD TUNER CD/MP3 PIC 24 Displays set-up parameters Displays set-up parameters OPEN/ CLOSE 25 Opens/Closes the TFT monitor Opens/Closes the TFT monitor Opens/Closes the TFT monitor Opens/Closes the TFT monitor 26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle 27 Increases monitor tilt angle Increases monitor tilt angle Increases moni
VM9020TS MULTI-ZONE REMOTE CONTROL Table 2: Multi-Zone Remote Control Functions Button Name Function Ref # DVD VCD 3 8 Toggles on/off audio output 1 5 2 9 MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title MUTE 3 Toggles on/off audio output AUDIO 5 Switches the audio language for disc playback REPT 7 Setup to repeat playback of each chapter/title/disc Setup to repeat playback
VM9020TS USING THE TFT MONITOR Open/Close TFT Monitor FULL The entire screen is extended horizontally to the aspect ratio of 16 to 9. The extension ratio is the same at any point. Open TFT Monitor Press the OPEN button (12) on the front panel or press the ( ) button (25) of the front zone remote control to open/ close the monitor. TFT Monitor Auto Open • • If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically moves to the last viewing position.
VM9020TS OPERATING INSTRUCTIONS Power On / Off Press the /MUTE button (1) to turn the unit on. The buttons on the front of the unit will light up. Press and hold the /MUTE button (1) on the front panel or the POWER button (4) on the remote to power off the unit. Audible Beep Confirmation An audible beep tone confirms each function selection. The beep tone cannot be disabled. Mute Press the /MUTE button (1) on the front panel or remote (3) to mute the volume from the unit.
VM9020TS SYSTEM SETUP MENU In “System Setup” mode, “ASP CONFIG” and “GENERAL SETUP” are available for adjustment. Setup can be performed by pressing the dedicated button on the remote control or by pressing the MENU/SRC button (11) on the front panel. For system settings, press the SYS SETUP button (31) on the remote control or touch “SETUP” on the screen to enter the “SETUP” menu. “SYS SETUP” is highlighted in green.
VM9020TS 2. 3. submenu appears in a second row with the selected option highlighted in light blue. Select a new value by pressing the or buttons (14, 22) on the remote control or the or buttons (6, 7) on the joystick. Confirm your selection by pressing the , , or buttons (14, 17, 19) on the remote control, or the or button (8, 9) on the joystick. The new value is highlighted in light blue and setup is complete.
VM9020TS TUNER OPERATION Tuner TFT Display Select FM/AM Band Touch the BAND button (16) on the screen, or press the TUNER button (10) on the unit or the BAND button on the remote control (20) to change between the following bands: FM1, FM2, FM3, AM1, and AM2. Auto Tuning Press and hold the button (19) on remote control or screen, or the button on the joystick (9) to seek the next available radio station by increasing the tuning frequency. Press the button again to stop searching.
VM9020TS DVD PLAYER OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally. Using the Touch-Screen Controls NOTE: For VCD play, the repeat function is not available if PBC is on. The touch key areas for DVD playback are outlined below.
VM9020TS Fast Forward/Fast Reverse Press the button (14) on the remote control or the button (6) on the joystick to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”. Continue pressing the or button to fast reverse. Press the or buttons (14, 22) on the remote control or the or buttons (8, 9) on the joystick to select a category (highlighted in blue). • For DVD mode, you can choose Time or Title/ Chapter search.
VM9020TS • • 00:41:28 – “00:41:28” indicates the playback time of the current title. 2 / 6 Eng – The language display information indicates the second language out of 6 (English) is currently being used. The following information appears at the bottom of the screen during DVD playback: Front: DVD • • Rear: AUXIN SURR II DSP Front: DVD is the current playback source for the front zone. Rear: AUX IN is the current playback source for the rear zone.
VM9020TS DVD SETUP MENU In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO” “SURR SETUP”, “SURROUND FX”, and “RATING” (parental lock) are available for setup. This operation can be performed using the remote control or joystick controls. Table 11: LANGUAGE Menu Features DIRECTION BUTTONS Setting DVD Menu Options English Accessing the DVD Setup Screen Setup can be performed by pressing the dedicated button on the remote control or by pressing the MENU/SRC button (11) on the front panel.
VM9020TS AUDIO Menu SURR SETUP Menu Table 14: SURR SETUP Menu Features The VM9020TS has a built-in Pink Noise generator to help set the relative speaker levels for multi-channel audio playback.
VM9020TS NOTE: When Surround I Music mode is selected, Dimension Control and Center Width are available for fine tuning to achieve a more realistic surround sound processing. RATING (Parental Lock) Menu The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once setup, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.
VM9020TS CD/MP3/WMA OPERATION Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3 operation. Please see the DVD Player Operation section for information about these topics. NOTE: CD-R and CD-RW will not play unless the recording session is closed.
VM9020TS SD CARD READER OPERATION Accessing SD Card Mode Moving Through Chapters To switch to SD card mode, press the SD button (19) on the front panel. Press the button (19) on the remote control or the button on the joystick (17) to advance to the next chapter. Using the Touch-Screen Controls Press the button (17) on the remote control or the button on the joystick (16) to move to the previous chapter. The touch keys for SD card playback are described below.
VM9020TS TV TUNER OPERATION Accessing TV Mode • To switch to TV mode, press the TV button (16) on the front panel or press the SRC button (8) on the remote control until TV appears at the bottom of the screen. Direct Channel Selection NOTE: Touch the top left corner to access the MAIN MENU Multi-ZONE SETUP menu and the top right corner to access the Multi-ZONE menu (rear zone setup).
VM9020TS TROUBLESHOOTING Table 18: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power on Remote control does not function No/low audio output Poor sound quality or distortion Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right corner of the front panel Battery depleted Replace battery with new one Battery installed incorrectly Remove batt
VM9020TS Table 18: Troubleshooting Problem Cause Image blurred, distorted, or dark Disc is illegally copied PBC cannot be used during VCD playback PCB is not available on the disc No repeat or searching while playing VCD PCB is on Corrective Action Use original disc Turn PCB off MP3 Interruption occurred during playback Incorrect playback message displayed Disc is dirty or scratched Clean disc or replace File is damaged/bad recording Recreate disc with good files Message is longer than LCD c
VM9020TS SPECIFICATIONS CEA Power Ratings Main Amplifier Power Output: 18 watts RMS X 4 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms) Dynamic Power: 88 watts into 4-ohms, all channels driven Frequency Response: 20Hz to 20kHz, -3dB. Aux input used as source reference Reference Supply Voltage: 14.4VDC Center Amplifier Power Output: 22 watts RMS X 1 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference.
VM9020TS 12-MONTH LIMITED WARRANTY AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.
