JWM20 Installation and Owner's Manual HDMI P.
JWM20 CONTENTS Introduction 3 Installation 4 Wiring 5 Connections 5 Basic Operation 6 Tuner Operation 8 MP3/USB Operation 9 Bluetooth Operation 10 Remote Control Operation 12 Care and Maintenance 14 Troubleshooting 15 Specifications 15
JWM20 INTRODUCTION Thank You! Ÿ Thank you for choosing a Jensen product. We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new Jensen receiver for maximum enjoyment.
JWM20 INSTALLATION 3.858" + - 0.02" . It's a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen JWM20 installed by a reputable RV dealership. Tools and Supplies 3.976" + - 0.
JWM20 WIRING WARNING: Wiring harness comes with stripped and tinned leads to aid in the installation process. Any unused speaker wires must have their exposed ends cut off or insulated individually. The wiring diagram depicts all the wiring connections required for proper operation of the unit. 10 1 20 10AMP FUSE 11 DETAIL A SHOWN FROM PIN VIEW PIN NO.
JWM20 BASIC OPERATION 4 5 6 7 8 NOTE: When subjected to cold temperatures for an extended period of time, LCD panels will take longer to illuminate and the display visibility may slightly decrease. Optimal LCD operation will return to normal when the temperature increases to a normal range. 9 Audio Menu HDMI P.SCAN 10 Press & hold ZONE A button (8) to access the audio menu.
JWM20 Time Display HDMI IN Press the TIME button (7) to alternate between playing time and clock time while in Tuner, USB, BT, HDMI In or auxiliary input mode. When a portable audio device is connected to the unit, press the HDMI/AUX button (6) repeatedly to source to HDMI IN mode, The HDMI audio input will play over speaker and low level outputs.
JWM20 Recall a Station TUNER OPERATION 4 5 6 7 8 Select a band (if needed), Press 1-6 preset button to select the corresponding stored station. 9 Automatically Store / Preset Scan (AS/PS) Auto Store HDMI P.SCAN 10 3 11 2 12 1 13 22 20 21 18 19 16 17 Select an AM or FM band, Press & hold the AM/FM button (4) to access tuner menu list: AUTO STORE & PRESET SCAN. Press AM/FM button (4) repeatedly until “AUTO STR” appears on the display.
JWM20 MP3/USB OPERATION 4 5 6 Play/Pause 7 8 Press the button (22) to suspend or resume media playback. 9 Next/Previous File Press the button (22) to select the previous or next track. Folder Up/Down Press the 6/FD UP button (14) to access higher folder level (FOLDER UP) Press the 5/FD DW button (15) to access lower folder level (FOLDER DOWN) HDMI P.
JWM20 BLUETOOTH OPERATION The JWM20 includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth-enabled devices for streaming audio playback. About Bluetooth Technology Press and hold the ZONE B button (9) to enter the menu adjustment mode. The following additional menu options are available when the unit is in Bluetooth mode: Ÿ Ÿ Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.
JWM20 Answering a Call When answering a call using the connected phone, Bluetooth audio playback will pause. After hanging up from the call, Bluetooth audio will continue on some phones. It may be necessary to press the play button (22) to resume Bluetooth audio playback. Bluetooth Audio (A2DP) The A2DP music is available for Bluetooth enabled phones when the phone is connected. To access Bluetooth mode and play songs stored on your phone, press the BT/USB button (5) to enter the Bluetooth mode.
JWM20 REMOTE CONTROL OPERATION 6 REF DESCRIPTION TUNER BLUETOOTH MP3/USB SYSTEM MENU 12 LOUD 1 Power Turn radio on/standby mode. Turn radio on/standby mode. Turn radio on/standby mode. Turn radio on/standby mode. 1 2 VOL +/- Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu.
JWM20 20 RPT NA Select source for playback NA Select source for playback Repeat track NA Select source for playback Select source for playback 21 SOURCE 22 ZOOM NA NA NA NA 23 ANGLE NA NA NA NA 24 AUD 25 GOTO 26 Display 27 AS/PS Browse preset stations (10 sec. interval). Press and hold to scan/store stations. NA 28 MENU Access system MENU. Access system MENU. Access Audio Menu options. NA Access Audio Menu options. NA Access Audio Menu options.
JWM20 CARE AND MAINTENANCE FCC Notes Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
JWM20 SPECIFICATIONS TROUBLESHOOTING Symptom Solution Radio will not turn ON or No front panel operation Check fuse. FM Tuner Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 108 MHz Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <4 μV Stereo Separation@1 kHz . . . . . . . . . . . . .
