Owner's Manual

INSTALLATION
Mounting
1. Determine where the speakers will be
mounted. Make sure the area
is large enough for the speaker
to mount evenly. Also ensure the
mounting location is deep enough for
the speaker to fit.
2. Refer to the specification chart to
determine the proper diameter hole to
cut for your speaker model.
3. If needed. use the grille as a template
to mark the locations for the
mounting screws. Drill the holes with
a 3/32" bit.
4. Fit the speaker to the hole cut-out.
Mount the speaker using the supplied
screws. If the speaker grille is to be
used. insert 4 screws into the grille
insert holes and then mount the
speaker.
Typical Door Installation (Top-mount)
Typical Rear Deck Installation
Mounting
Hole
\
Speaker
mounting hole
cut-out
speaker
grille
4