WALL MOUNTABLE DOCKING MUSIC SYSTEM WITH CD FOR iPod and iPhone USER MANUAL JiMS-260i (iPod/iPhone Not Included) PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
CAUTION CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM. This product contains a low power laser device. Note: This product complies with DHHS Rule 21 Subchapter J at date of manufacture. Follow the advice below for safe and appropriate operation.
PRECAUTION FOR USE • • • UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL. DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND ALL OTHER CONNECTIONS HAVE BEEN MADE. DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION. IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
PROTECT YOUR FURNITURE This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture.
INSTALLATION FOR TABLE TOP USE Attach the stand to the main unit as shown in figure 1a below. Attach the stands to the speakers as shown in figure 1b below. Fig. 1a Fig.1b FOR WALL MOUNTING 1) Detach the stands from both speakers and from the main unit. 2) Use the supplied wall-mounting template to make anchor hole marks on the wall. Make sure the marks are level before drilling. 3) Drill 1/4” holes on the marks.
LOCATION OF CONTROLS Main Unit 17 1 2 16 15 3 14 4 13 5 12 6 11 7 10 8 9 1. Function Selection Button 2. Volume+ Button 3. Volume- Button 4. Power On/Standby Button 5. Left Speaker 6. CD Door 7. Sleep Button 8. Timer Button 9. CD Program; FM Station Memory Set; Clock Adjust Button 10. CD/iPod Play Mode Selection; FM Memory Down 11. Remote Infrared Sensor 12. Right Speaker 13. Play/Pause Button; FM Memory Up Button 14. CD Stop Button ; FM Stereo/Mono selection 15.
Remote Control 1 18 17 2 16 3 15 4 14 13 5 6 7 12 8 11 9 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
GETTING STARTED SPEAKER CONNECTION Unpack the unit carefully. The speaker wires are already attached to main unit. Handle with care to avoid damaging the wires. Place the left speaker on the left side of the main unit and place the right speaker on the right side of the main unit. ANTENNA CONNECTION FM: Untie and fully extend the FM Antenna wire for best reception. POWER SUPPLY This Music System operates on 120V AC~ 60Hz household power.
NOTE: Only use a well-known brand of cell battery to ensure the longest life and best performance. BATTERY CARE i. If the unit is not used for an extended period of time, remove the battery. An old or leaking battery can cause damage to the unit and may void the warranty. ii. Do not dispose batteries in fire. Batteries may leak or explode. iii. Do not try to recharge batteries that are not intended to be recharged; they can overheat, rupture and leak (Follow battery manufacturer’s directions). iv.
3.) To automatically search for stations with strong signals, press and hold either the or button until the frequency read out on display begins to scan then release the button. The tuner will stop on the first strong station signal it finds. 4.) Adjust the sound level by pressing the VOLUME + / - buttons. 5.) Press the TIMER button to show the current time on the display. The time will revert back to the station frequency readout after 5 seconds.
LISTENING TO iPod/iPhone CONNECTING If the docking port will not be used for an extended period of time, it is recommended to cover the docking port by using the “Dock Cover (included)”. 1.) Use the iPod adapter included with your iPod and insert it into the docking area. No Adaptor is required if you use an iPhone. Your iPod / iPhone can now be inserted into the docking port by placing the connector on the bottom of the iPod onto the connector in the docking bay.
VIDEO OUT FROM THE iPod/iPhone 1. You can connect this unit to a television or other video display that has a composite video input. 2. Securely dock your iPhone or iPod with video. 3. Connect one end of an RCA cable (not included) to rear RCA video jack on the unit. 4. Connect the other end of the RCA cable to VIDEO IN of television or video display. 5. Press the FUNCTION button to select iPod/iPhone mode. 6. Select a movie from your iPod/iPhone menu. 7.
Normal Playback After loading the disc, the disc will begin spinning and the total number of the tracks on the disc will be shown on the display for a while. Then the CD Player will automatically play the CD start from the first track and the display will show the playback time of the current track. NOTE: If there is no disc in the unit or the loaded disc is not recognized by this player, “no cd” will be shown on the display. Play/Pause Control To pause temporarily during the CD playback, press the button.
Programmed CD Playback The CD player can be programmed to play any sequence of up to 20 tracks. In CD mode, 1. Load a compact disc into the CD compartment. 2. After load the disc, press the STOP button before starting the programming. 3. Press PROG button, “MEM” “01:--“ indicates and flashes on the display for 30 seconds. 4. Press the or button to select the desired track to be programmed. 5. Press PROG button again to save the selected track. The programmed track number “02 --” indicates on the display.
5). Press the TIMER button to confirm, wake up source flashing. Press the button to select a source you want to wake to. 6). Press the TIMER button to confirm, Press the wake volume level. or or buttons to set the 7). Press TIMER button to confirm, Note: When “Wake to Radio” is selected, make sure the radio station you want to wake to is tuned.
4. To select auxiliary audio input, press the FUNCTION button to select “AUX” mode. 5. The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual. Note: (1) If the Line Out Jack of your external device is connected, then you only need to adjust the volume control of this system.
• When cleaning the disc, wipe in straight lines from the center of the disc to the edge of the disc. Never wipe in circular motions. • To remove a disc from its storage case, press down on the center of the case and lift the disc outs, holding it carefully by the edges. • Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth. Unlike conventional records.
TROUBLESHOOTING GUIDE Symptom The unit does not respond (no power). Possible Problem Solution AC Adaptor is not plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit. Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit. Wall outlet is not functioning. iPod does not dock properly. iPod/iPhone does not respond to the speaker system. Using no/wrong iPod Adaptor. iPod does not install properly.
SPECIFICATIONS Power Requirement Main Unit AC-DC adaptor Remote Control Input: AC 120V~ 60Hz Output: DC10V / 2000mA 1 x 3V CR2025 Lithium Battery Frequency Range Radio FM 87.5 - 108 MHz, 0.1 MHz tuning step “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod and iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
