Instructions / Assembly

628036 2
Door Adjustment
1. Check for clearance and alignment between mirror doors. The
center door may be adjusted if necessary. (FIG 4)
2. Horizontal (side) adjustment: Loosen arm fastening screw. Then
loosen or tighten arm adjustment screw until the door is balanced.
To move door away from hinge turn adjusting screw clockwise. To
move door closer to hinge, turn adjusting screw counter clockwise.
Retighten arm fastening screw.
3. Vertical (height) adjustment: Loosen mounting base plate screws on
plates attached to the cabinet divider and position the door up or
Down. Retighten the mounting base plate screws.
4. Depth adjustment: Loosen the hinge arm fastening screw. Then
regulate the distance between the door and sidewall by moving the
door in and out until it is flush with the others. Then tighten the
fastening screw.
ONE YEAR LIMITED WARRANTY
Broan-NuTone Storage Solutions warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one (1)
year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this one year period, Broan-NuTone Storage Solutions will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and
service. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or
repair (other than by Broan-NuTone Storage Solutions), faulty installation or installation contrary to recommended installation instructions. Labor to remove and replace products is not
covered.
The duration of any implied warranty is limited to the one year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the
above limitation may not apply to you.
BROAN-NUTONE STORAGE SOLUTIONS” OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE STORAGE SOLUTIONS’ OPTION, SHALL BE THE PURCHASER’S SOLE
AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE STORAGE SOLUTIONS SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This
warranty supersedes all prior warranties.
Date of Installation ________________________________________________________________________________________________________________________________________
Model No and Product Description ____________________________________________________________________________________________________________________________
IF YOU NEED ASSISTANCE OR SERVICE - CONTACT:
Broan-NuTone Storage Solutions, 501 S. Wilhite Street, Cleburne, TX 76031 www.nutone.com (1-800-325-8351)
RECOMMENDED LAMPS:
60 watt maximum
Type G 25 or 40
Clear Incandescent
Medium Base (E27)
DESCRIPTION
Magnetic Latch A7256
Socket Cup B5629801
Mounting Screw 8 X 1-3/4” PPH Type A *
Wall Anchors *
PART NUMBER
* Standard Hardware – may be purchased locally.
SERVICE PARTS
FIG 4
ARM FASTENING
SCREW
ARM ADJUSTMENT
SCREW
MOUNTING BASE PLATE
MOUNTING
BASE PLATE
SCREW(S)
(other screw
In base plate
not shown)