Technical Specifications

SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Low Profile
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Recess Mount Installation
• Wall Opening/Rough-in Dimensions: 12½” x 34¼” x 3½”
• Formed and welded steel housing (WB/ST)
• 24 gauge steel with white, heat cured, acrylic paint finish
• Frameless mirror door
• 1/8” float glass mirror door front with polished
edges (POL1)
• 22 gauge steel door back with white, heat cured, acrylic
paint finish
• 32” piano hinge with 90º stop welded to the door and mechanically
fastened to the cabinet body (HG01) (1 typical)
• Magnet in white plastic cover fastened to cabinet body aligns to
stainless steel striker plate on the door (1 typical)
• Reversible for left-hand or right-hand door swing
• 3/16” thick glass shelves, adjustable (ADJ) (3 typical)
• Mounting hardware, aluminum shelf brackets (3 left & 3 right
typical), and a 26 gauge galvanized steel toothbrush holder with
white, heat cured, enamel paint finish included
• Standard Pallet Quantity of 32 units
S663BC_C
Finishes:
Housing: PT01— Basic White
Mirror: POL1—Polished Edge
Frame: Frameless
Dimensions In Inches
Model # Description A B C D E F G H J K
663BC MEDCAB 1DR 15X36 FMLS WB/ST 15 36⅛ ¾ 3⅞ 12 1 14 33-13/16 1 3/16
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com