Technical Specifications

SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Styleline
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Recess mount installation
• Wall Opening/Rough-in Dimensions: 14” x 24” x 3½”
• One piece drawn steel housing (HY/ST)
• 22 gauge steel with white, heat cured, acrylic paint finish
• Framed Mirror door
• 2MM thick float glass mirror door front
• Polished stainless steel frame with tab and screw closure
(SS8)
• 22 gauge steel door back with white, heat cured, acrylic
paint finish
• 16” piano hinge with 90º stop welded to the door and
mechanically fastened to the cabinet body (HG01) (1 typical)
• Reversible for left-hand or right-hand door swing
• 3/16” thick glass shelves, adjustable (ADJ) (3 typical)
• Magnetic door catch in the cabinet body aligns to a stainless
steel striker plate on the door back
• Mounting hardware, aluminum shelf brackets (6 typical), and a
26 gauge galvanized steel toothbrush holder with white, heat
cured, enamel paint finish included
• Standard Pallet Quantity of 24 units
Meets Federal Specification #WW-P-541/8B
S470FS_C
Finishes:
Housing: PT01— Basic White
Mirror: Flat Mirror
Frame: SS8—Polished Stainless Steel
Dimensions In Inches
Model # Description A B C D E F G H J K
470FS MEDCAB 1DR 16X26 SS8 HY/ST 16⅛ 26⅛ 1⅝ 5¼ 13⅝ 1 15⅝ 23¼ 1 7/16
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com