Technical Specifications

SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Lighted
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Recess Mount Installation
• Wall Opening/Rough-in Dimensions: 14” x 19” x 3½”
• Drawn steel housing (HY/ST)
• 25 gauge formed and welded light housings welded to sides of
drawn steel housing (1 left / 1 right typical)
• 25 gauge formed wiring channel welded to housing top
• 24 gauge drawn steel housing construction with white, heat
cured, acrylic paint finish
• Frame Mirror door
• Polished stainless steel frame (SS8)
• 2mm float glass mirror door front
• 25 gauge steel door back with white, heat cured, acrylic paint
finish
• 16” piano hinge with 90° stop welded to the door and mechanically
fastened to the cabinet (HG01) (1 typical)
• Magnetic catch in cabinet body flange aligns to stainless steel striker
plate on the door (1 typical)
• Right-hand door swing
• High-Impact, clear polystyrene shelves (PC), adjustable (ADJ)
(2 typical)
• Aluminum shelf brackets (4 typical)
• Fluorescent side lights (F15T8 / bi-pin / 120V) included (2 typical)
• Extruded translucent white acrylic ribbed light lenses with UV
stabilizer (2 typical)
• Chrome plated end caps for light lenses (4 typical)
• Grounded switch and convenience outlet
• Switch and outlet (UL listed) located on right side, above
cabinet bottom
• Mounting hardware included
• Standard Pallet Quantity of 24 units
S455FL_0
Finishes:
Housing: PT01—Basic white
Mirror: Flat Mirror
Frame: SS8—Polished Stainless Steel
Dimensions In Inches
Model # Description A B C D E F
455FL MEDCAB 1DR 20X22 SS8 HY/ST 20⅜ 22¼ 3⅞ 13½ 18½ 3⅜
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com