Technical Specifications

SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Styleline
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Surface Mount Installation
• Pre-drilled mounting holes spacing: y = 11.500” center-to
-center and x = 11.0” center-to-center
• Formed and welded steel housing (WB/ST)
• 24 gauge steel construction with white, heat cured, acrylic
paint finish
• Framed mirror door
• Polished Stainless Steel frame (SS8)
• 2mm thick float glass mirror door front
• 30 gauge steel door back with white, heat cured, acrylic paint
finish
• 16” piano hinge welded to the door and mechanically fastened to
the cabinet body (HG01) (1 typical)
• Magnetic catch in cabinet body flange aligns to stainless steel
striker plate on the door (1 typical)
• Reversible for left-hand or right-hand door swing
• 26 gauge galvanized steel shelves with white, heat cured,
enamel paint finish (2 typical)
• Fixed shelf - removable (FX2)
• Mounting hardware included
• Pallet quantity = 36 units
S452SM_N
Finishes:
Housing: PT01—Basic white
Mirror: Flat Mirror
Frame: SS8—Polished Stainless Steel
Dimensions In Inches
Model # Description A B C D E F
452SM MEDCAB 1DR 16X22 SS8 WB/ST 16⅛ 22⅛ 5 15½ 21½ 4½
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com