Technical Specifications

SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Flair
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Surface Mount Installation
• Pre-drilled mounting holes
• Formed and welded steel housing (WB/ST)
• 25 gauge steel construction with white, heat cured,
acrylic paint finish
• Polished stainless steel trim strips - both sides and
bottom on body front
• 22 gauge galvanized steel top cover
• Sliding Mirror Doors
• 1/8” thick float glass mirror door with polished edges, 4
sides (2 typical)
• Clear acrylic door pull (2 typical)
• Mirror doors slide in white PVC dual slotted tracks (2
typical / one top & one bottom) snapped into housing
• Incandescent dual light sockets (2 typical) (Uses four 60 watt
maximum, medium base, 120V bulbs (I60A) - bulbs not included)
• .White, translucent plastic lens
• .063 thick high impact polystyrene
• Ribbed outside surface
• Grounded on/off switch located top right side of cabinet
• 25 gauge steel shelf with white, heat cured, acrylic paint finish (1
typical)
• Fixed shelf (FX)
• Includes installation hardware
• Pallet Quantity = 18 units
S327LP_P
Finishes:
Housing: PT01—Basic White
Mirror: POL1 - Polished Edge
Cabinet Trim: SS8-Polished Stainless Flat
Dimensions In Inches
Model # Description A B C D E F
327LP MEDCAB 2DR 28X19 SS8 WB/ST 27¾ 19⅜ 7-7/16 9-9/16 22-11/16 4-11/16
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com