Spec Sheet

SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Topsider
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
• Surface Mount Installation
• Pre-drilled mounting holes spacing: x = 11.625” center-
to-center and y = 9.0” center-to-center
• Formed and welded steel housing (WB/ST)
• 24 gauge steel construction with white, heat cured,
acrylic paint finish
• Framed mirror door
• 3/32” thick float glass mirror door front
• Polished stainless steel frame (SS8)
• 30 gauge steel door back with white, heat cured,
acrylic paint finish
• 16” piano hinge welded to the door and mechanically fastened
to the cabinet body (HG01) (1 typical)
• Magnetic catch in cabinet body flange aligns to stainless steel
striker plate on the door (1 typical)
• Reversible for left-hand or right-hand door swing
• 26 gauge galvanized steel shelves with white, heat cured,
enamel paint finish (2 typical)
• Fixed shelves — removable (FX2)
• Includes installation hardware
• Pallet Quantity = 42 units
S26018CH_A
Finishes:
Housing: PT01-Basic White
Mirror: Flat Mirror
Frame: SS8-Polished Stainless Steel
Dimensions In Inches
Model # Description A B C D E F
26018CH MEDCAB 1DR 14X18 SS8 WB/ST 14⅛ 18⅛ 5 13½ 17 4½
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com