Technical Specifications

SPECIFICATION SHEET
Architect
Engineer
Contractor
Submitted by Date
Location
Project
REMARKS QTY. REFERENCE
Ensign
MEDICINE CABINET
FEATURES/TYPICAL SPECIFICATIONS
 Surface Mount Installation
 Pre-drilled mounting holes
 Formed and welded steel housing (WB/ST)
 24 gauge steel construction with white, heat cured,
acrylic paint finish
 Polished stainless steel trim strips - both sides, top, and
bottom on body front
 24 gauge galvanized steel top cover
 Sliding Mirror Doors
 3/16” thick float glass mirror door with polished edges, 4
sides (2 typical)
 Clear acrylic door pull (2 typical)
 Mirror doors slide in gray PVC dual slotted tracks (2
typical / one top & one bottom) snapped into housing
 Incandescent dual light sockets (2 typical) (Uses four 60 watt
maximum, medium base, 120V bulbs (I60A) - bulbs not included)
 .White, translucent plastic lens
 .060 thick high impact polystyrene
 Ribbed outside surface
 Grounded convenience outlet and on/off switch located top right
side of cabinet
 26 gauge galvanized steel shelf with white, heat cured, enamel
paint finish (1 typical)
 Fixed shelf — removable (FX2)
 Includes installation hardware
 Pallet Quantity = 18 units
S124LP_K25
Finishes:
Housing: PT01 - Basic White
Mirror: POL1 - Polished Edge
Cabinet Trim: SS8-Polished Stainless Steel
Dimensions In Inches
Model # Description A B C D E F
124LP MEDCAB 2DR 24X23 SS8 WB/ST 24 23½ 8¼ 19⅞ 15 5½
* All models and material specifications are subject to change or withdrawal without notice.
Rangaire Manufacturing Company, LP * 501 S. Wilhite Street, Cleburne, TX 76031
(1-800-325-8351) * www.rangairemfg.com