JE3708 37” LCD TV User's Guide Please observe all safety precautions when using this product. Please read this manual carefully before using this product.
Safety Precautions Power Supply Warnings Do not touch the power plug with wet hands. Doing so may result in electric shock. Do not bend the power cord excessively or place heavy objects on it. Doing so may result in fire or electric shock. Do not use a damaged power cord or plug or a loose outlet. Do not plug several devices into the same outlet. Doing so may result in fire or electric shock. Doing so may cause the outlet to overheat and start a fire. Insert the power plug fully into the outlet.
Installation Warnings Do not place containers with liquids such as flower vases, soft drink cans, or medicine bottles or small metallic objects on top of the unit. If liquid enters the unit or any metal object falls into the unit, it may result in short-circuit, fire, or electric shock. Do not place a burning candle, burning anti-mosquito incense, or lighted cigarette on top of the unit. Do not place the unit near any heat source such as a fireplace or space heater. Doing so poses a serious risk of fire.
Safety Precautions Use and Maintenance Warnings Disconnect the power cord from the wall outlet during an electrical storm. Not doing so may result in fire or electric shock. Do not insert any metal objects, such as a screwdriver, paper clip, or bent wire into the ventilation openings or A/V terminals. Do not allow children to climb or hang on the unit. The unit could topple over onto a child and result in serious injury. Doing so poses a serious risk of fire or electric shock.
Safety Precautions Important Safety Instructions Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth.
Safety Precautions Important Safety Instructions 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Safety Precautions Important Safety Instructions WARNING TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Caution : - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
User Guidance Information Names of each part Front View Channel/Program + , - Button Source Button - Input Source Select Button Menu Button - OSD Menu Display Button Power Button Volume + , - Button Accessories The configuration of the components may look different from the following illustration. -/-- User's Guide AV Cable Battery 1.
User Guidance Information Names of each part Back View 1 HDMI jack 4 AV1 AUDIO(L/R) and VIDEO jacks 7 RF jack 2 PC and AUDIO jack 5 AV2 AUDIO(L/R) and VIDEO jacks 8 POWER ON/ OFF jack 3 Y, Pb, Pr jack 6 S - VIDEO jack 9 AC input jack 10 AUDIO(L/R) output jacks Power on To turn on the LCD TV Press on the back of the LCD TV to first. Power off Be sure to turn off the power and unplug both units from the wall outlet before making any connections.
User Guidance Information Mounting on a Desktop Your LCD TV can be mounted on a Desktop as shown in the figure above. This is not floor-standing unit. Installation Precautions Wall Mounting Please secure enough space for safe use. (Please refer to A and B.) Installation of the LCD TV in an improperly ventilated location can cause a fire or damage to the LCD TV due to increased temperature.
User Guidance Information Installing an Antenna 12
User Guidance Information Remote Control -/-- MTS Press MTS to select Stereo, SAP or Mono. Note: This button can only be used under NTSC mode. EPG Press EPG to display the program guide. DTV Press DTV to display the DTV(ATSC) OSD menu during DTV(ATSC) mode. CC Close Caption 14 DTV EPG MTS CC V-CHIP SCALE V-CHIP Press V-CHIP to choice the rating SCALE Cycles among scale mode: 16:9, ZOOM1, ZOOM2, 4:3, PANORAMA.
User Guidance Information Precautions Avoiding Remote Control Problems 1. Check the polarity (+,-) of the batteries in the remote control. 2. Check that the batteries have power. 3. Check that the LCD TV is powered and that it is properly plugged in. 4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the LCD TV. Inserting Batteries in the Remote Control 1. Open the cover completely. 2. Insert the two supplied batteries (AAA, 1.5V).
Connection VCR Connections Connecting to the Composite terminal Connection terminals of other equipments differ by manufacturer and model. < VIDEO > (R) (L) Composite Cable Connect the LCD TV's Composite In terminal to the VCR's Composite Out terminal using the Composite cable. (Make sure the color of the terminals and the color of the cable are the same) Connecting to the S-Video terminal < VIDEO > (R) (L) S-Video Cable Use the S-Video cable for higher picture quality. Watching Video Tape 1.
Connection DVD Connections Connecting to the component terminal Connection terminals of other equipments differ by manufacturer and model. < DVD > Y Pb Pr (R) (L) Component Audio cable Component connection cable 1. Connect LCD TV's Y, Pb, Pr terminal to DVD's Video Out terminal using the external cable. 2. Connect LCD TV's Audio terminals (left & right) in AV 1 to DVD's Audio Out terminal using the Audio cable. 3.
Basic Use Powering the LCD TV Power on/ off Press on the back of the LCD TV to first. To turn the LCD TV on : Press the "POWER" button. To turn the LCD TV off : Press "POWER" button on the LCD TV. To turn on/off by remote control : Press the “POWER” button of remote control. Selecting Input Source You can select between the TV signal and the input signal of other equipments connected to the TV. Use this function to switch to the input source you wish to view.
Basic Use Watching TV Channel Up and Channel Down CH+ channel up CH- channel down You will see all the channels that the TV has memorized. To go back to the previous channel Press RETURN to go back to the channel you were previously viewing. Volume Control VOL.+ increases the volume. VOL.- decreases the volume. To turn sound off only Use the mute function to turn off the LCD TV sound for a while, when a phone or a bell rings. Press MUTE again to hear the sound again.
Application Setting up the DTV(ATSC) Function Scanning the Digital TV channel 1. 2. With the LCD TV connected to a television programming source, press the SOURCE button on the remote control to select DTV mode. Press the DTV button on the remote control to display the main menu, and use the LEFT and RIGHT buttons to select. Channel 3. Caption Setup Lock Select Channel item first, then press the DOWN button to select Auto Scan, and press the ENTER button.
Application Setting up the DTV(ATSC) Function The DTV(ATSC) menu includes the following options: Channel Caption Allows to set closed caption ON or OFF. Analog Close Caption Allows to set basic analog closed caption options: CC1/CC2/CC3/CC4 Digital Close Caption Allows to set digital closed caption options: Service 1/Service 2/Service 3/ Service 4/ Service 5/ Service 6 Auto Scan Automatically store the receivable channels. Press the TV button at any time to interrupt the memorization process.
Application Setting up the DTV Function Using the Lock Settings Use RIGHT button to highlight the LOCK item, then press ENTER. The unit will demand you input the 4-digital password first. The factory password is 0000.
Application Setting up the DTV(ATSC) Function TV Guidelines ALL FV V S L D TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Use the UP and DOWN buttons to select the rating you want and press the ENTER button to select Blocked Rating or Unblocked Rating. Change PIN Use DOWN button to select the Change PIN item, then press ENTER. The screen will display as following: Change PIN Confirm Input the new 4-digital password and input it again to confirm.
Application Customizing the PICTURE Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the PICTURE. 3. Use the UP and DOWN buttons to highlight an individual PICTURE option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit the menu.
Application Customizing the SOUND Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the SOUND 3.
Application Customizing the FUNCTION Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the FUNCTION. 3. Use the UP and DOWN buttons to highlight an individual FUNCTION option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit the menu.
Application Customizing the FUNCTION Settings Using the Parent Guide Settings NOTE: The Parent Guide item can only be activated under TV mode. The US has 2 rating system for viewing content: Movie rating (MPAA) and TV rating. The TV rating conjuncts with the V-CHIP to help parents block inappropriate programs from their children. The Movie rating (MPAA) is used for original movies rated by the Motion Picture Association of America (MPAA) as broadcasted on cable TV and not edited for television.
Application Customizing the FUNCTION Settings Using the Parent Guide Settings The TV Rating includes the following options AGE-BASED ALL FV V S L TV-Y U TV-Y7 U TV-G U TV-PG U U U U U TV-14 U U U U U TV-MA U U U U U Use the UP and DOWN buttons to select the rating you want and press the ENTER button repeatedly to select Blocked Rating (B) or Unblocked Rating (U) The Parent Guide MENU includes the following options : Change Password Use DOWN button to select “Change Passwor
Application Customizing the TV Settings Air/ Cable Allows selection among HRC, Air, STD and IRC signal sources Skip Allows addition/ removal of channels.
Application Customizing the PC Settings 1. 2. 3. 4. Press the POWER button to turn the LCD TV on. Press the SOURCE button on the remote control to select VGA mode. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the PC. Use the UP and DOWN buttons to highlight an individual PC option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit the menu.
Application Customizing the ADVANCED Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the ADVANCED. 3. Use the UP and DOWN buttons to highlight an individual ADVANCED option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit the menu.
Maintenance and Service Trouble shooting Do not use other functions that are not mentioned in this user’s manual. In case a problem occurs with your LCD TV, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized service center. Problem Action The screen does not appear. Is the power plug pulled out? Insert the power plug. Press the power button of the remote control. The screen appears too slowly after the power is turned on.
LCD-TV Wall mounting assembly instruction 1. Lay the TV down with the rear facing up on a non-abrasive surface. 2. Remove the six screws shown in figure A with a Phillips screwdriver. Figure A 3. Remove the stand from the TV by pulling it out of the cabinet. See Figure B.
4. Insert the supplied plastic stand cover as shown in Figure C and D. Figure C Figure D 5. Remove the 4 screws shown in Figure E. 6. Figure E Attach the wall mounting bracket (not supplied) using these 4 screws.
www.asaelectronics.
