Safety Precautions: CONTENTS: 1. Ensure the plug is securely plugged into the main socket before operating the unit. 2. Ensure the Voltage on the main socket is the same as specified on the unit. 3. Use parts only manufactured by the unit manufacturers. 4. Request a repair report from the technician/service personnel. 5. Ensure the battery is correctly installed before using the unit. In case of the following emergencies, remove plug from the main socket immediately: 1. Plug or cables are damaged. 2.
CONTENTS: PC Adjust Setting ----------------------------------------------------------- 1. INTRODUCTION: 16 7. ANNEX A LCD Maintenance -------------------------------------------------------------- 17 8. ANNEX B Troubleshooting ---------------------------------------------------------------Common Problems ------------------------------------------------------------- 18 18 9.
Contents/Accessories : 2. Product Specifications: (Please check the content of the Package.) 1. 23" Television / monitor for Mobile use 2. 12V DC Power 3. High Performance, 16:9 LCD Panel 4. High Brightness 500 nit 5. High contrast ratio 500:1 6. Ultra wide viewing angle 170 degrees Monitor 7. Front controls 8. Cable ready TV tuner with Closed Caption and V-Chip 9. High output speakers 10. Built in 2 Channel IR transmitter for optional wireless headphones 11.
4. INSTALLATION GUIDE: When Connecting to a TV Cable: 1. Remove Antenna Socket cover. 2. Plug the cable to the input socket on the unit. 3. Connect the cable that comes along with the unit to the one you are using when needed. ATTENTION : Please refer external setting operating instruction. TV AVTENNA (photo.2) Noted: When connect Component Video input, please set OSD (AV1 Select) to "CV" to view Component-Video source. Input (RCA) from other Equipment: Connect to the TV AV IN 2 socket.
5. Basic Functions : * VGA Input: This unit provides VGA (Computer) input connector. 1. Connect computer VGA output to the monitor VGA input using VGA cable. 2. To connect audio source, using audio cable to connect from computer audio output to VGA audio input. * POWER SIGNAL: 1. When POWER indication LED on unit turns RED in color indicating power is connected. 2. Press the "Power" button on the remote control, the POWER indication LED on the TV Front Panel will turn "GREEN in color".
6. OSD Settings: TV Setting : This monitor provide "OSD" setting, enable you to customize the setting for monitor. Noted: Before adjust settings, ensure all the video source is in correct mode. Management Setting : Press "MENU" button, osd menu will display on screen, press "SET / " button to select "TV setting", and press "ENTER" button to enter TV setting,then press "SET / / / select course settings.
6. OSD Settings: 7. OSD Settings: This monitor provide "OSD" setting, enable you to customize the setting for monitor. Noted: Before adjust settings, ensure all the video source is in correct mode. This monitor provide "OSD" setting, enable you to customize the setting for monitor. Noted: Before adjust settings, ensure all the video source is in correct mode.
6. OSD Settings: OSD Settings: This monitor provide "OSD" setting, enable you to customize the setting for monitor. Noted: Before adjust settings, ensure all the video source is in correct mode. Management Setting : Press "MENU" button, osd menu will display on screen, press "SET / " button to select "Management setting", and press "ENTER" button to enter management setting, then press "SET / / / select course settings.
8. ANNEX B: Troubleshooting: If the unit fails to operate normally, try solving the problems using the guide below. If the problem persists, switch off the unit and ask the dealer or customer services officer for assistance. Do not attempt to repair the defective unit yourself. Do not endanger yourself as high voltage is involved. 1. No Picture: a. Check that the power cord is plugged into the main socket d (e)Tj (t)Tj ( )Tj (d (e)Tj 1ao.Tj (P)Tj (k(t)Tj ( )Tj Tj (e)3csj (865 ce)Tj ( )Tj (d)Tj (e)Tj (4.
asaelectronics.
