Owner's Manual

11
JWM90A
Multi-source Mode Setup
1.Press the ZONES button (31) to enter the zone menu.
2.While in the zone menu, press ZONES button (34), or the |<< or >>| buttons
(20, 19) repeatedly to navigate through the zones menu settings (ZONE A mode,
ZONE A volume adjustment, ZONE B mode, ZONE B volume adjustment, ZONE
C mode and ZONE C volume adjustment).
3.Rotate the VOL/ENTER knob to cycle through the available modes. Available
modes are AM, FM, BLUETOOTH, FRONT AUXILIARY, REAR AUXILIARY,
COAXIAL OPTICAL, DISC and USB.
Or press the AM, FM, DISC, BT, USB or AUX button (26, 25, 24, 23, 22, and 21)
to choose the desired mode for each zone mode setting.
Press the AUX button (21) repeatedly to cycle through the FRONT AUXILIARY,
REAR AUXILIARY, COAXIAL, OPTICAL, HDMI ARC and HDMI IN.
4.Press ENTER knob (4) to confirm the mode selection.
NOTE: If Zone A is in AM, FM, BT, FRONT AUX or REAR AUX mode, the multi-
source function cannot be activated. Zone B and Zone C source mode will follow
Zone A.
If Zone A is in DISC, USB, COAXIAL, OPTICAL, HDMI IN or HDMI ARC mode,
the following sources are selectable for Zone B: AM, FM, BT, FRONT AUX,
REAR AUX as well as the current active Zone A source. Zone C source mode will
follow Zone B.
If Zone A and Zone B are both set to DISC, USB, COAXIAL, OPTICAL, HDMI IN, or
HDMI ARC mode, the following sources are selectable for Zone C: AM, FM, BT,
FRONT AUX, REAR AUX as well as the current active Zone A/B source.
AM, FM, BT, FRONT AUX
or REAR AUX
DISC, USB, COAXIAL,
OPTICAL, HDMI IN or
HDMI ARC
DISC, USB, COAXIAL,
OPTICAL, HDMI IN or
HDMI ARC
Same source as Zone A AM, FM, BT, FRONT
AUX, REAR AUX, or
same source as Zone
A/B
AM, FM, BT, FRONT
AUX, REAR AUX, or
same source as Zone A
Same source as Zone B
(AM, FM, BT, FRONT
AUX, REAR AUX)
same source as Zone A same source as Zone A
Multi-source Zone Table
Zone A Zone B Zone C