JWM70A MOBILE AUDIO SYSTEM Installation and Owner's Manual
JWM70A Introduction..............................................................................................................................3 Disc Notes................................................................................................................................4 Installation...............................................................................................................................5 Wiring.............................................................................
JWM70A INTRODUCTION Thank You! Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment.
JWM70A DISC NOTES Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to the following recommendations: Ÿ Ÿ Ÿ Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x. Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x. Do not play a CD-RW which has been written more than 5 times.
JWM70A INSTALLATION . It's a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen JWM70A installed by a reputable RV dealership. NOTE: Before cutting the mounting hole, make sure the area behind the mounting location is clear of wires, fuel and vacuum or brake lines.
JWM70A WIRING WARNING: Wiring harness comes with stripped and tinned leads to aid in the installation process. Any unused speaker wires must have their exposed ends cut off or insulated individually. The wiring diagram depicts all the wiring connections required for proper operation of the unit. 10 1 10A 20 WIRING HARNESS CONNECTOR (SEE DETAIL A) 11 DETAIL A SHOWN FROM PIN VIEW PIN NO.
JWM70A Mode BASIC OPERATION 20 19 18 17 15 1. Press the MODE button (15), the LCD will display “MODE” and access mode selection. 2. Press the MODE button, |<< or >>| buttons (6, 8), or rotate the VOL/ENTER knob to cycle through the available modes and choose the desired mode. Available modes are AM, FM, FRONT AUX, REAR AUX, HDMI ARC, DISC and USB. 3. Press ENTER knob (4) to confirm the mode selection.
JWM70A Note: Beep tone off will not affect the audible tone of the alarm clock. REGION (USA/EUROPE): Set frequency spacing for various regions. BLUETOOTH (ON/OFF): Choose “Bluetooth On” or Bluetooth Off”. PRESET VOL (1-40): Select an automatic turn on volume. RESET : Press the ENTER button to return the JWM70A to factory default settings.
JWM70A See the ARC function Operation in the following table: No Device Status Head Unit 1 User Operation Power ON (HDMI Power ON ARC) Remarks Operation Results Head Unit TV TV Power OFF TV Power OFF Power OFF Power ON TV Power OFF Power ON 2 Power OFF 3 Power OFF(Last Power OFF mode is HDMI ARC before Power OFF) Power ON Head Unit Power ON (HDMI ARC) Power ON (Last mode before power off) 4 Power OFF(Last TV, AV, USB, mode is HDMI ARC HDMI(non- HDMI before Power OFF) ARC) Power ON He
JWM70A TUNER OPERATION 4.Press the BACK button (2) to exit presets menu. 20 19 18 17 16 15 1 14 13 Recall preset stations 1.Press the PRESETS button (13) to access the preset menu. 2. Press |<< or >>| buttons (6, 8) or rotate the VOL/ENTER knob to navigate the 6 preset stations. 3. Press the ENTER knob to confirm the selection 4. Press the BACK button (2) to exit preset menu. The LCD will display the current station on 1st line and the preset station selection on the 2nd line in presets menu.
JWM70A DISC OPERATION Track Select 20 19 18 17 Press the >>| or |<< button (8, 6) to advance to the previous or next track on the CD. The selected track number will appear on the display. Press and hold the >>| or |<< button for more than three seconds to fast forward or fast reverse through the disc. CD plays start when the play/pause button is pressed.
JWM70A 2. Use the or cursor buttons (15) on the remote control to access the fields on the “PROG” screen. 3. Use the number buttons on the remote control to enter a track number in each field. 4. Press the u /|| button (17) on the remote control or highlight “PLAY” on screen and then press the ENTER button (5) to begin playback in the numbered order indicated to delete the list, highlight “CLEAR” and then press ENTER. Press PROG to exit the programmed playback screen.
JWM70A Programmed Playback 1. Press the PROG button (7) on the remote control to access the programmed playback screen. TT 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is currently playing. CH 2/16 – “2 / 16" indicates that the second of 16 chapters on the DVD is currently playing. Press repeatedly to view the following information: for elapsed/remaining playing time: 2. Use the ◄►or ▲▼cursor buttons (15) on the remote control to access the fields on the "PROG" screen. 3.
JWM70A MP3/USB OPERATION 20 19 18 17 Maximum number of MP3 files: 999 Maximum number of characters for MP3 file name and folder name: 32 Maximum number of Characters of ID3 Tag: ID3 Tag version 1.0: 32 ID3 Tag version 2.x: 32 16 MP3 Monitor Display After loading an MP3 disc or USB device, the following screen will appear on your output Monitor.
JWM70A 4.Press the ENTER knob (4) to confirm selection. 5.Press the BACK button (2) to confirm your selection and exit time menu. The unit will automatically exit the playback menu after 5 seconds of inactivity. The following playback menu items can be adjusted: Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ INTRO SCAN: To play the first 10 seconds of each track on the current disc. Press ENTER knob to turn the intro scan function on or off.
JWM70A BLUETOOTH OPERATION The JWM70A includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth devices for streaming audio playback. Ÿ Ÿ About Bluetooth Technology Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters. Ÿ Bluetooth On/Off Bluetooth mode is turned ON by default.
JWM70A Pausing Playback During playback, press the ▶ II button (7) to pause the Bluetooth audio playback. “BT PAUSE” will appear on the LCD. Press ▶II button again to resume playback. If you change to another mode, the mobile device audio will pause. Press the PAIR button (9) to return to Bluetooth mode and resume mobile phone audio playback. APP OPERATION JENSEN® Specialty Controller is the ultimate wireless remote control for your JENSEN stereo system.
JWM70A REMOTE CONTROL OPERATION REF DESCRIPTION TUNER 6 BLUETOOTH CD/MP3/USB DVD Turn radio on/standby mode. Turn radio on/standby mode. Turn radio on/standby mode. Turn radio on/standby mode. 1 Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu.
JWM70A 19 Press to view title menu. Use directional arrows and play button to play selected title. May not be supported by all discs. TITLE 20 RPT 21 SOURCE 22 ZOOM 23 ANGLE Select source for playback Select source for playback Repeat track Repeat chapter Select source for playback Select source for playback Zoom picture or press repeatedly to change magnification level. Select alternate viewing angle, if available. Access Audio Menu options. Access Audio Menu options.
JWM70A DVD SETUP MENU Press the (setup) button (10) on the remote control to access the SETUP menu and adjust system settings for the following categories: System Setup Language Setup Audio Setup Video Setup Digital Setup Lanuage Setup The Language Setup menu controls the following features: While in the setup menus, use your directional arrows to select and change settings.
JWM70A Video Setup The Video Setup menu controls the following features: – – – – – Brightness Contrast Hue Saturation Sharpness Digital Setup The Speaker Setup menu controls the following features: – – – OP Mode: Select LINE OUT or RF REMOD. Dynamic Range: Select FULL, 6/8, 4/8, 2/8 or OFF. Dual Mono: Select STEREO, MONO/L, MONO/R or MIX MONO.
JWM70A CARE AND MAINTENANCE – – – – – Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
JWM70A SPECIFICATIONS FCC Notice FM Tuner Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 108 MHz Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <4 μV Stereo Separation@1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
