JWM60A MOBILE AUDIO SYSTEM Installation and Owner's Manual
JWM60A CONTENTS Introduction......................................................... 3 Disc Notes......................................................... 4 Installation..........................................................5 Wiring..............................................................6 Basic Operation..................................................... 7 Tuner Operation.....................................................9 Disc Operation......................................................
JWM60A INTRODUCTION Thank You! Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment.
JWM60A DISC NOTES Ÿ Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to the following recommendations: Ÿ Ÿ Ÿ Ÿ Ÿ Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x. Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x. Do not play a CD-RW which has been written more than 5 times.
JWM60A INSTALLATION . It's a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen JWM60A installed by a reputable RV dealership.
JWM60A WIRING WARNING: Wiring harness comes with stripped and tinned leads to aid in the installation process. Any unused speaker wires must have their exposed ends cut off or insulated individually. The wiring diagram depicts all the wiring connections required for proper operation of the unit. 10 1 10 A MP F USE 20 11 DETAIL A SHOWN FROM PIN VIEW PIN NO.
JWM60A This function will time out after six seconds of inactivity and the unit will resume normal operation. BASIC OPERATION Loudness Press the LOUD button (32) to toggle the loudness function on/off. Mute 1 2 39 3 38 4 37 5 36 6 7 9 11 35 34 8 33 32 10 31 30 12 Press the MUTE button (34) to silence the audio output in tuner, CD, DVD, BT, USB or auxiliary input mode. Press again to restore the previous volume level.
JWM60A Auxiliary Input Function Press the AUX button (26) to directly access auxiliary input modes (AUX IN1 and AUX IN2) from any other mode when a portable audio device is connected to the unit. To connect a portable audio device, insert a standard 3.5mm (audio line output or headphone output from your portable CD / MP3 / iPod or other media player) into the AUX A/V IN connector (AUX IN1) (26) on the front of the unit or the AUDIO IN (AUX IN2) on the back of the unit (see“Wiring” on page 3).
JWM60A TUNER OPERATION Automatically Store / Preset Scan (AS/PS) 1 2 39 3 38 4 37 5 36 6 7 9 11 35 Automatically Store Select an AM or FM band. Press and hold the AS/PS button (30) for more than 3 seconds and the unit will automatically scan for and store 12 or 18 strongest stations for AM or FM respectively. To stop this function before the automatic storing is complete, press AS/PS again. Preset Scan Select a band. Press AS/PS button to scan stations stored in the current band.
JWM60A DISC OPERATION Track Select Press the >>| or |<< button (35, 6) to advance to the previous or next track on the CD. The selected track number will appear on the display. Press and hold the >>| or |<< button for more than three seconds to fast forward or fast reverse through the disc. CD play starts when the play/pause button is pressed.
JWM60A Remote Control Direct Track Entry To select a track directly, use the number pad on the remote control (10). For single digit entries, press the corresponding number for two digit entries. Press the 10+ button followed by the last digit (i.e., for track 16, press 10+ and then 6). Stop Playback Press the 1/ ■ button (7) to suspend disc play, and “PRE STOP” will appear in the display. Press the u II button (33) to resume disc play from the last position.
JWM60A 2. Use the ◄►or ▲▼cursor buttons (15) on the remote control to access the fields on the "PROG" screen. 3. Use the number buttons on the remote control to enter a track number in each field. 4. Press the u /|| button (17) on the remote control or highlight “PLAY” on screen and then press the ENTER button (5) to begin playback in the numbered order indicated to delete the list, highlight “CLEAR” and then press ENTER. Press PROG to exit the programmed playback screen.
JWM60A Mp3 Monitor Display MP3/USB OPERATION After loading an MP3 disc or USB device, the following screen will appear on your output Monitor. 1 2 39 3 38 4 37 5 36 6 7 9 11 35 34 8 33 32 10 31 30 12 29 13 14 28 16 26 15 27 17 20 18 19 24 22 21 25 23 Select one of these icons to access the corresponding media on your disc or USB device. If the media type is not present, the icon will not be selectable.
JWM60A Random Shuffle (RDM) Press the 3/ button (9) during disc play to play all files in random, shuffled order. Press 3/ again to stop random play. Fast Forward/Reverse Press the >>| or |<< button (35, 6) for more than three seconds or press the >> or << button on the remote control (16) to fast forward or fast reverse. Press and hold once for FORWARD X 2. Press and hold additional times for FORWARD X 4, X 8, X 20 or PLAY.
JWM60A BLUETOOTH OPERATION The JWM60A includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth devices for streaming audio playback. Ÿ Ÿ About Bluetooth Technology Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.
JWM60A APP OPERATION Selecting Tracks During playback, press the >>| or |<< button (35, 6) to play the previous or next track. Pausing Playback During playback, press the ▶II button (33) to pause the Bluetooth audio playback. “BT PAUSE” will appear on the LCD. Press ▶II button again to resume playback. If you change to another mode, the mobile device audio will pause. Press the BT button (22) to return to Bluetooth mode and resume mobile phone audio playback.
JWM60A REMOTE CONTROL OPERATION REF DESCRIPTION TUNER 6 BLUETOOTH CD/MP3/USB DVD Turn radio on/standby mode. Turn radio on/standby mode. Turn radio on/standby mode. Turn radio on/standby mode. 1 Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu. Adjust volume up/down. Press for Audio Control Setup menu.
JWM60A 19 Press to view title menu. Use directional arrows and play button to play selected title. May not be supported by all discs. TITLE 20 RPT 21 SOURCE 22 ZOOM 23 ANGLE Select source for playback Select source for playback Repeat track Repeat chapter Select source for playback Select source for playback Zoom picture or press repeatedly to change magnification level. Select alternate viewing angle, if available. Access Audio Menu options. Access Audio Menu options.
JWM60A DVD SETUP MENU Press the (setup) button (10) on the remote control to access the SETUP menu and adjust system settings for the following categories: System Setup Language Setup Audio Setup Video Setup Digital Setup Lanuage Setup The Language Setup menu controls the following features: While in the setup menus, use your directional arrows to select and change settings.
JWM60A Video Setup The Video Setup menu controls the following features: – – – – – Brightness Contrast Hue Saturation Sharpness Digital Setup The Speaker Setup menu controls the following features: – – – OP Mode: Select LINE OUT or RF REMOD. Dynamic Range: Select FULL, 6/8, 4/8, 2/8 or OFF. Dual Mono: Select STEREO, MONO/L, MONO/R or MIX MONO.
JWM60A CARE AND MAINTENANCE – – – – – Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
JWM60A SPECIFICATIONS FCC Notice FM Tuner Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 108 MHz Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <4 μV Stereo Separation@1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E L E C T R 0 N I C S,.. 2602 Marina Drive • Elkhart, IN 46514 www. asaelectroni cs.
AUDIO : Press to bring up AUDIO ADJUSTMENT options : BASS , TREBLE , BALANCE (left to right), & FADE (front to back) . VOLUME: Rotate clockwise to increase volume or counter-clockwise to decrease volume. AM : Press to change the source to AM radio mode. FM: Press to change the source to FM radio mode. DISC : Press to change the source to Disc mode. BT: Press to change the source to BLUETOOTH mode . USB : Press to change the source to USB mode . AU X: Press to change the source to AUX mode .
TUNE/SEEK/TRACK : Advance or reverse tracks . on your device ANSWERING PHONE: BT audio will automatically pause when a call is answered. It will then resume once call has ended . In some cases , it may be necessary to press the play button to resume the BT audio. 1: Press once to SUSPEND disc play and twice to RESET disc back to first track . 2 : Press to EXIT from setting menu . 3: Press SHUFFLE songs. Press again to SEQUENTIAL play .
