Installation Guide

2
Table of Contents/Table des matières
BUILT-IN OVEN SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided.
Tools Needed
■ Phillips screwdriver
■ Measuring tape
■ Drill (for wall cabinet installations)
■ 1/8" (3.1 mm) drill bit (for wall cabinet installations)
■ Level
■ Flat-blade screwdriver
Parts Supplied With Your Built-In Oven
■ #8-14 x 1" (2.5 cm) screws - (2) single ovens, (4) double
ovens included with built-in oven
■ (2) #8-18 x 3/8" (9.5 mm) screws - bottom vent included with
built-in oven
■ (4) #8-18 x 3/8" (9.5 mm) screws - included with built-in oven
■ Bottom vent included with built-in oven
■ (2) Feet double oven included with built-in oven
■ (2) Front feet double oven included with built-in oven
BUILT-IN OVEN SAFETY ................................................................2
INSTALLATION REQUIREMENTS .................................................2
Tools and Parts .............................................................................2
Location Requirements ................................................................3
INSTALLATION INSTRUCTIONS ...................................................5
Prepare Built-In Oven ...................................................................5
Remove Oven Door(s) ..................................................................5
Replace Oven Door(s) ..................................................................6
Positioning Oven Feet .................................................................7
Replace Plastic Spacers ..............................................................8
Install Oven ................................................................................... 9
Install Deector Kit Bracket .........................................................9
Complete Installation .................................................................10
SÉCURITÉ DU FOUR ENCASTRÉ ..............................................11
EXIGENCES D’INSTALLATION ...................................................12
Outillage et pièces ......................................................................12
Exigences d’emplacement .........................................................12
INSTRUCTIONS D’INSTALLATION .............................................15
Préparation du four encastré .....................................................15
Dépose de la/des porte(s) du four .............................................15
Réinstallation de la/des porte(s) du four ....................................16
Positionnement des pieds du four .............................................17
Remplacement des cales d’espacement en plastique .............18
Installation du four ......................................................................19
Installation du support de la trousse du déecteur ...................19
Achever l’installation ..................................................................20
06-May-2019 13:38:41 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")