Flush Installation Instructions

Replace Plastic Spacers

1. Remove the 3 screws, 1 in each spacer, attaching the

3 plastic spacers (A) to the right side of the oven.

2. Using the 3 screws removed, install 3 new plastic spacers

(B) provided with this kit.

A. Plastic spacer

B. New plastic spacer

3. In the same manner, remove and replace the 3 plastic

spacers on the left side of the oven.

B. New plastic spacer

Install Oven

1. Using 2 or more people, lift the oven partially into the

cabinet cutout. Use the oven opening as an area to grip.

NOTE: When pushing the microwave oven into the

cabinet, open the microwave oven door and push against

the seal area on the front frame. Do not push against the

outside edges.

2. Push against the front frame of the microwave oven

to push oven into cabinet.

3. Push the microwave oven completely into the cabinet

and center the microwave oven into the cabinet cutout.

4. Remove the tape from the black front trims and remove the

zip tie from the mounting spacer.

■ Securely fasten the oven to the cabinet using

the #8-14 x

⁄4" screws provided.

■ Insert the screws through hole in black trim aligning with

hole in oven frame and mounting spacer already in place.

A. Oven Frame

B. Mounting spacer

C. Oven frame hole

D. Black trim piece