Flush Installation Instructions

6
Positioning Oven Feet
The oven feet need to be installed to allow a microwave/oven
combination to be installed in a recommended cutout height
of 42
1
⁄2" (107.9 cm).
NOTE: Do not remove the spacers.
A. Spacers
1. Using 2 or more people, place the oven on its back on
a covered surface.
5
A
3. In the same manner, install a foot on the right rear of
the oven.
4. Install a front foot on the left front spacer using a
#8-18 x
3
⁄8" screw.
NOTE: Position the foot so the long side of the foot
is facing toward the inside of the oven.
A. Front foot
B. #8-18 x
3
⁄8 " screw
C. Spacer
A
B
C
5. In the same manner, install a front foot on the right
front of the oven.
2. Install a foot on the left rear spacer using a
#8-18 x
3
⁄8" screw.
NOTE: Position the foot so the long side of the foot
is facing toward the top of the oven.
A. Spacer
B. Foot
C. #8-18 x
3
⁄8 " screw
A
B
C
6. Using 2 or more people, place the oven in its upright position.
7. Go to the “Make Electrical Connection” section in the
Installation Instructions provided with your built-in oven.