Use and Care Guide

34 | ASSISTANCE
PERFORMANCE DATA SHEET
WATER FILTRATION SYSTEM
MODEL P1WB2P1RFWB2 CAPACITY 200 GALLONS 757 LITERS
MODEL P1WB2LP1RFWB2L CAPACITY 200 GALLONS 757 LITERS
This system has been tested according to NSF/ANSI Standards 42, 53 and 401 for the reduction of the substances listed below. The concentration of
the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the
system, as specified in NSF/ANSI Standards 42, 53, and 401.
Substance Reduction Aesthetic
Effects
Inuent Challenge Concentration Maximum Permissible
Product Water Concentration
Average % Reduction
Chlorine Taste/Odor 2.0 mg/L ± 10% ≥50% reduction >97.5%
Particulate Class I* At least 10,000 particles/mL ≥85% reduction 99.2%
Contaminant
Reduction
Inuent Challenge
Concentration
Maximum Permissible
Product Water Concentration
Average %
Reduction
Lead***: @ pH 6.5 / @ pH 8.5 0.150 mg/L ± 10% 0.010 mg/L >99.3% / >99.3%
Mercury: @ pH 6.5 / @ pH 8.5 0.006 mg/L ± 10% 0.002 mg/L >96.4% / 90.8%
Asbestos 107 to 108 fibers/L
††
99% 99%
Cysts
†
50,000/L min. 99.95% >99.99%
Turbidity 11 NTU ± 10% 0.5 NTU >99.1%
Alchor 0.040 mg/L ± 10% 0.002 mg/L 97.6%
Atrazine 0.009 mg/L ± 10% 0.003 mg/L 94.5%
Benzene 0.015 mg/L ± 10% 0.005 mg/L 96.6%
Carbofuran 0.080 mg/L ± 10% 0.040 mg/L 91.1%
Chlorobenzene 2.000 mg/L ± 10% 0.100 mg/L 99%
Endrin 0.006 mg/L ± 10% 0.002 mg/L 96.6%
Ethylbenzene 2.100 mg/L ± 10% 0.700 mg/L 99.9%
Lindane 0.002 mg/L ± 10% 0.0002 mg/L 99%
MTBE MTBE 0.015 mg/L ± 10% 0.005 mg/L 90.6%
O-Dichlorobenzene 1.800 mg/L ± 10% 0.600 mg/L 99.9%
Tetrachloroethylene 0.015 mg/L ± 10% 0.005 mg/L 96.4%
Toxaphene 0.015 mg/L ± 10% 0.003 mg/L >93.7%
System tested and certified by NSF International against NSF/ANSI Standard 42, Standard 53, and Standard 401 for the
reduction of contaminants specified on the Performance Data Sheet.