Installation Instructions

7
PRODUCT DIMENSIONS
 Width dimensions were measured from hinge to
hinge.
 When leveling legs are fully extended to 1⁄"
(3.2 cm) below rollers, add 1⁄" (3.2 cm) to the height
dimensions.
MODEL WIDTH A HINGE EDGE TO HINGE EDGE
42 41⁄" (106 cm)
48 47⁄" (121.3 cm)
NOTE:
 Do not remove the foam gasket from the top of the
compressor cover unless removal is necessary to fit
the unit under a soffit. Removal of the gasket will
cause loss in cooling efficiency.
 If installing under a solid soffit, after installation raise
the leveling legs so that the gasket is pressed snugly
against the soffit.
DOOR SWING DIMENSIONS
The location must permit both doors to open to a
minimum of 90°. Allow 4⁄" (11.4 cm) minimum space
between the side of the refrigerator and a corner wall.
NOTE : More clearance may be required if you are using
wood overlay panels, custom handles, or extended
handles.
MODEL A B C D
42
40⁄"
(103.5 cm)
39⁄"
(101.0 cm)
45⁄"
(115.3 cm)
46⁄"
(118.8 cm)
48
43⁄"
(109.9 cm)
42"
(106.7 cm)
48⁄"
(123.5 cm)
50⁄"
(127.6 cm)
90˚
110˚
110˚
90˚
A CB D
24" (61 cm)
Width (A)
83⁄"
(211.1 cm)