Installation Instructions

6. Remove the oven bake burner screws and oven bake burner

and gently set aside.

7. Lift up clip on the oven bake burner electrode bracket with a

finger or flat-blade screwdriver and pull away the electrode.

8. Pull electrode out of bracket.

9. Apply masking tape to the end of a 7 mm nut driver to help

hold the gas orifice spud in the nut driver while changing it.

Insert nut driver into the gas opening and press down onto

the gas orifice spud and remove by turning the gas orifice

spud counterclockwise and lifting out. Set gas orifice spud

aside.

A. Oven bake burner screws

B. Oven bake burner

C. Oven bake burner electrode bracket

D. Oven bake burner electrode

A. Oven bake burner electrode bracket

B. Electrode bracket clip

A. Grasp electrode here.

B. Bracket

A. Gas orifice spud