Owners Manual
22 | ASSISTANCE
PERFORMANCE DATA
SHEET
WATER FILTRATION SYSTEM
MODEL EDR3RXD1BP1WB2 CAPACITY 200 GALLONS 757 LITERS WITH PID; 100 GALLONS 378 LITERS WITHOUT PID
REPLACEMENT FILTER EDR3RXD1, EDR3RXD1B, AND KAD3RXD1
This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of the substances listed below. The concentration of the
indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in
NSF/ANSI Standards 42, 53, 401 and CSA B483.1.
Substance Reduction Aesthetic Effects Influent Challenge Concentration Maximum Permissible Product Water Concentration Average % Reduction
Chlorine Taste/Odor
Particulate Class I*
2.0 mg/L ± 10%
At least 10,000 particles/mL
50% reduction
85% reduction
>97.5%
99.2%
Contaminant Reduction Influent Challenge Concentration Maximum Permissible Product Water Concentration Average % Reduction
Lead: @ pH 6.5 / @ pH 8.5 0.150 mg/L ± 10% 0.010 mg/L >99.3% / >99.3%
Mercury: @ pH 6.5 / @ pH 8.5 0.006 mg/L ± 10% 0.0002 mg/L >96.4% / 90.8%
Asbestos 10
7
to 10
8
fibers/L
††
99% 99%
Cysts
†
50,000/L min. 99.95% >99.99%
Turbidity 11 NTU ± 10% 0.5 NTU >99.1%
Alachlor 0.040 mg/L ± 10% 0.002 mg/L 97.6%
Atrazine 0.009 mg/L ± 10% 0.003 mg/L 94.50%
Benzene 0.015 mg/L ± 10% 0.005 mg/L 96.6%
Carbofuran 0.080 mg/L ± 10% 0.040 mg/L 91.1%
Chlorobenzene 2.000 mg/L ± 10% 0.100 mg/L 99%
Endrin 0.006 mg/L ± 10% 0.002 mg/L 96.6%
Ethylbenzene 2.100 mg/L ± 10% 0.700 mg/L 99.9%
Lindane 0.002 mg/L ± 10% 0.0002 mg/L 99%
MTBE 0.015 mg/L ± 10% 0.005 mg/L 90.6%
O-Dichlorobenzene 1.800 mg/L ± 10% 0.600 mg/L 99.9%
Tetrachloroethylene 0.015 mg/L ± 10% 0.005 mg/L 96.4%
Toxaphene 0.015 mg/L ± 10% 0.003 mg/L >93.7%
TTHM 0.045 mg/L ± 10% 0.080 mg/L 99.5%
Styrene 2.000 mg/L ± 10% 0.100 mg/L 99.9%
VOC 0.300 mg/L ± 10% 0.015 mg/L 99.7%
System tested and certified by NSF International against NSF/ ANSI Standard 42, 53, 401 and CSA B483.1 for the
reduction of contaminants specified on the Performance Data Sheet.