Use and Care Guide

15
OVEN CONTROL KNOBS
To Use:
1. Select desired function on the Mode Knob.
2. Select desired temperature on the Temperature Knob.
3. To turn off the unit, the temperature knob needs to be turned to OFF.
Knob Combinations
The following table shows valid and invalid knob combinations for the temperature and mode knobs.
MODE KNOB
TEMPERATURE KNOB
PROOF
KEEP
WARM
TEMP
RANGE
BROIL
LOW
BROIL
HIGH
CLEAN Wi-Fi
Bake Valid Valid Valid
(225-500F)
Invalid Invalid Invalid Invalid
Convect Bake
Invalid Invalid
Valid
(225-500F)
Invalid Invalid Invalid Invalid
Convect Roast
Invalid Invalid
Valid
(225-500F)
Invalid Invalid Invalid Invalid
Steam Bread/Meats
Invalid Invalid
Valid
(250-450F)
Invalid Invalid Invalid Invalid
Broil/Convect Broil
Invalid Invalid Invalid
Valid Valid
Invalid Invalid
Self Clean
Invalid Invalid Invalid Invalid Invalid
Valid
Invalid
Wi-Fi
Invalid Invalid Invalid Invalid Invalid Invalid
Valid
NOTE: When the unit is on, mode can be changed between Bake, Convect Bake, Convect Roast, and Broil/Convect Broil. Press the
Start button to confirm mode change.
INDICATOR LIGHTS
The indicator lights illuminate and blink to show the status of the unit.
BEHAVIOR DESCRIPTION/EXAMPLES EXAMPLES
Light Pulsing/Blinking Light pulsing is used on the Mode Knob, Temperature
Knob, and Start button as a way to prompt for action.
When an action is prompted to be completed, the
associated indicator light feature will blink.
Examples:
Occurrence: Prompt for action, press START
Result: START Indicator Quick Blink
Occurrence: 100ºF (38ºC) decrease in temperature
required or oven too hot for Proof
Result: Knob indicator lights will slowly blink until the
oven is at the correct proof temperature
There are two types of pulsing:
1. Start Button
Quick Blink: prompting for action.
2. Mode/Temperature Knob
White slow blink: preheating
Amber slow blink: unit is above target
temperature.
When a cycle requiring preheat starts, slow
blink will begin. When preheat temperature
has been reached, the blinking will stop and
the mode/temp indicator lights will be solid.
Mode and Temperature
Knob Indicator - Slow Blink
The Mode and Temperature knob indicators will
slowly blink to indicate that the feature is in use.
A slow blink indicates that a feature is being
used and no further action is required i.e. unit
is preheating.
START Button - Invalid
Selection (Quick Blink)
If an invalid knob combination has been chosen and
the Start Button is pressed, the Start Button Indicator
Light will quickly blink and a tone will sound to
indicate that the chosen selection is invalid.
See “Knob Combinations” table for examples.
Bake on the Mode knob and Wi-Fi on the
Temperature knob.
USING YOUR OVEN