Use and Care Guide

ASSISTANCE | 29
PERFORMANCE DATA SHEET (CONT.)
ASSISTANCE
It is essential that operational, maintenance, and filter replacement
requirements be carried out for the product to perform as advertised.
Use replacement filter T2RFWG2, part #4396841.
Model T2WG2L: Style 1 – When the filter indicator reads 10%, order a
new filter. When the indicator reads 0%, it is recommended that you
replace the filter.
Style 2 – When the filter indicator changes from green to yellow,
order a new filter. When the indicator changes from yellow to red, it is
recommended that you replace the filter.
Style 3 – When the water filter status display changes from “GOOD” to
“ORDER,” order a new filter. When the filter indicator reads “REPLACE,
it is recommended that you replace the filter.
Style 4 – Press FILTER to check the status of your water filter. If the filter
indicator light is yellow, order a new filter. If the filter indicator light is
red, it is recommended that you replace the filter.
Model T2WG2: Change the water filter cartridge every 6 months. If the
water flow to the water dispenser or ice maker decreases noticeably
before 6 months have passed, replace the water filter cartridge more
often.
These contaminants are not necessarily in your water supply. While
testing was performed under standard laboratory conditions, actual
performance may vary.
The product is for cold water use only.
Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
Refer to the “Warranty” section for the Manufacturer’s name, address
and telephone number.
Refer to the “Warranty” section for the Manufacturer’s limited warranty.
Application Guidelines/Water Supply Parameters
Water Supply City or Well
Water Pressure 30-120 psi (207 - 827 kPa)
Water Temperature 33°-100°F (0.6° - 37.8°C)
Service Flow Rate 0.85 gpm (3.2 Lpm) @ 60 psi (413.7 kPa)