Manual

IVIODEL$:JXT9030 JXT9036 JXT9048
lostallation
Theinstallationin thismanualis intendedfor qualifiedinstallers,servicetechniciansor persons
withsimilarqualifiedbackground.DONOTattemptto installthisapplianceyourself.Iniurycould
resultfrominstallingthe unitdueto lackofappropriateelectricalandtechnicalbackground.
All electrical wiring must be properly installed, insulated and grounded. Overly accumulated
grease in old duct work should becleaned out or duct work should be replaced if necessary to
avoid the possibility of a grease fire. Checkall ioints on duct work to insure proper connection
and all ioints should be properly taped.
Operations
Readall instructions in this manual before operating the appliance. Save these instructions for
future reference.
Always leave safety grills and filters in place. Without these components, operating blowers
could catch on to hair;fingers and looseclothing.
NEVERdispose cigarette ashes, ignitable substances, or any foreign obiects into blowers.
NEVERleavecooking unattended.When frying, oil in the pan can easily overheat and catch fire.
The risk of self combustion is higher when the oil has been used severaltimes.
Cleaning
The saturation of greasy residue in the blower and filters may cause increased flammability.
Keep unit clean and free of grease and residue build-up at all times to prevent possible fires.
Filters must be cleaned periodically and kept free from accumulation of cooking residue (see
cleaning instructions inside). Oldand worn filters must bereplaced immediately. Donot operate
blowers when filters are removed. Neverdisassemble parts toclean without properinstructions.
Disassembly is recommended to be performed by qualified personnelonly. Callour service cen-
ter for removal instructions. 1-800-JENNAIR(USAand Canada),(1-800-536-6247)
The manufacturer declines all responsibility in the event of failure to observe the instruc z
tions given here for installation, maintenance and suitable use of the product. Themanufacz
turer further declines all responsibility for injury due to negligence and the warranty of the
unit automatically expires due to improper maintenance.
* Please check tot latest specification revisions before any custom work or cutouts.