Installation Instruction

6
INSTALLATION REQUIREMENTS
Tools and Parts
IMPORTANT:
■ Installer: Leave Installation Instructions with the homeowner.
■ Homeowner: Keep Installation Instructions for future reference.
Save these Installation Instructions for the local electrical
inspector’s use.
Tools Needed:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Parts Needed:
■ #8 x 3" (7.6 cm) wood screws (longer screws may be needed) (6)
■ 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood boards (2)
■ Custom wood overlay panels—consult a qualified
cabinetmaker or carpenter to make the custom wood panels.
See “Custom Wood Overlay Panels” for more information.
OR
“Panel Kit Installation Requirements” for panel kit information.
■ Flexible, codes approved water supply tubing, a ferrule, a union
and a ¹⁄₄" (6.35 mm) compression fitting.
Parts Provided:
■ Cordless drill
■ Drill bits
■ Adjustable wrenches (2)
■ Phillips screwdriver
■ Small level
■ ³⁄₃₂" hex key
(panel kits only)
■ ¹¹⁄₃₂" nut driver
■ ³⁄₈" and ¹⁄₂" open-end wrenches
■ ⁵⁄₃₂" and ³⁄₁₆" hex key
■ ¹⁄₄" and ⁵⁄₁₆" socket drivers
■ Tape measure
■ Utility knife
■ Tape (painters)
■ Appliance dolly
Slotted hex-head screw
W10141645 (21)
Hex-head pointed screw
W10141189 (8)
Hex-head blunt screw
W10142233 (4)
Shoulder washer (use with hex-head
pointed screw)
W10471946 (4)
Phillips-head flat screw
8281252 (28)
Round-head screw
1163283 (24)
Door Adjustment Pin
(preinstalled)
W10234194 (2)
Door Stop Pin
W10234202 (2)
Standard Integrated Grille
Bracket
W10182743—Left (1)
W10182741—Right (1)
Panel templates
W10488101 - 42" SxS
W10488113 - 48" SxS
W10744761 - Grille
Fully Integrated Grille
Bracket
W10260890—Left (1)
W10260891—Right (1)
Filler Board “L” Bracket
W10234199 (2)
Panel top bracket
W10667450 (2)
Top Grille Lower Trim
W10606812—42" SxS (1)
W10740171—48" SxS (1)