Trim Kit Installation

6
6. Using one 3/16" x 5/8" (4.5 x 16 mm) screw, attach the power
supply cord clip to the top of the cabinet.
7. Secure the power supply cord with the power supply cord
clip. Make sure there is enough slack in the power supply
cord to allow the coffee system to be pulled completely from
the cabinet in order to ll the coffee bean container.
8. Plug the coffee system into a grounded 3-prong outlet.
9. Push the coffee system back into the housing.
10. Proceed to “Complete Installation” section.
Complete Installation
1. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the Use
and Care Guide or contact the dealer from whom you purchased
your trim kit.
Approx. 13¹¹/₁₆"
(34.8 cm)
A
B
A. Power supply cord clip
B. Power supply cord
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING