Trim Kit Installation

3
Cabinet Dimensions
Refer the below dimensions along with the dimensions in the
built-in oven, microwave or coffee machine dimension guide.
Single Built-In Oven,
Microwave or Coffee
Machine
A = 17
11
⁄
16
" (45 cm)
Pyro Wall Oven A = 22
13
⁄
16
" (58 cm)
INSTALLATION INSTRUCTIONS
Install Side Trim Cover Kit for Built-In Oven, Steam, Microwave, or Coffee Machine
Follow the instructions below to install the Side Trim Cover Kit
on a built-in oven steam, microwave, or coffee machine.
1. Center the mounting jig horizontally in the cabinet opening,
place it ush against the cabinet opening, and secure it with
two Phillips screws as shown.
2. Attach each trim surface to the trim structure with hex-head
screws at the top and bottom. Do not tighten the screws
completely.
3. Align each trim structure/surface assembly with the cabinet
as shown and attach each with four Phillips screws.
A
B
A
B
A. Mounting jig
B. Phillips screws
A
BC
A. Trim Structure
B. Hex head screw
C. Trim Surface
Alignment with
side surface
Alignment with
front surface