Tech Sheet
FOR SERVICE TECHNICIAN’S USE ONLY
6
To Enter Load Test Mode:
Once LOAD TEST MODE is selected, it is possible to test the following
functional parts by pressing on the related display area.
Display Function
Motor Up
Moves motor in upper position (once the TOP
LIMIT SWITCH is reached, a specic message
will appear on the screen)
Motor Down
Moves motor in lower position (once the
BOTTOM LIMIT SWITCH is reached, a specic
message will appear on the screen)
Fan Activates the cooling fan
Scenario Light Activates the external light
Grinder Activates the grinder
Pump Activates the pump
Steamer Activates the steamer
Heater
Activates the heater of the generator (thermo
block)
Cup Light Activates the lights above the cup position
EV1 + EV3 Activates the two EV1 and EV3 solenoid valves
EV2 Activates the EV2 solenoid valve
To Exit the Service Mode:
To EXIT the service mode, switch the Main On/Off Switch to OFF or unplug
the machine.
Measuring Coffee Temperature
1. Turn the machine on and run a rinse cycle.
2. Set the temperature to the maximum level. Press and select the option
“Tall Coffee”.
3. Wait for the container to ll with at least 20 mL of coffee.
4. Measure the ow temperature 5-10 mm away from the spout.
5. The indicative temperature must be 187°F (± 3°F).
187
10 mm