Tech Sheet

5
Service Mode
To Enter Service Mode:
1. With the machine in stand-by (plugged in with the main switch on, but the
machine OFF), open the service door.
2. Press the four corners of the display simultaneously until the Service
Menu appears.
3. The possible options will be displayed.
4. Close the door and choose one of the options by pressing and holding
the relative display area.
Display Function
Load Test Mode Tests all the functional parts by pressing the related
display area.
Reset Encoder Resets the value recorded as the top position for
the Diverter Assembly. If a mechanical or electrical
component in the Diverter Assembly is replaced (for
example, the transmission kit, switches or the mechanical
valve) you will need to reset the encoder. If you change
the control board, the machine will reset it automatically.
Test Display Tests all the areas of the display. See chart below for
‘KEY’ areas on display (‘KEY 1’, KEY 2’, etc.).
Electric Test Used only by production for nal tests.
Energy Saving Energy saving functionality activation will reduce the
temperature for the coffee and steam heaters in standby
mode reducing consumption when machine is ON
but not used. When delivering a beverage, there is no
difference. This setting can also be changed by the user
on the user interface.
TEST
DISPLAY
LOAD
TEST
MODE
ELECTRIC
TEST
MODE
RESET
ENCODER
ENERGY
SAVING
KEY 1 KEY 0
KEY 2
KEY 4 KEY 5 KEY 6 KEY 7 KEY 8 KEY 9
KEY 12
KEY 11