Tech Sheet

11
PROBLEMS POSSIBLE CAUSE SOLUTION
The milk does not come out from the
milk spout
The lid of the milk frother is dirty. Clean the lid of the milk frother.
The milk tube has not or not correctly been inserted. Insert the milk tube in the milk frother lid.
The appliance does not come on The power cord is not plugged in to the electrical
outlet.
Power to the appliance is disconnected.
Plug in appliance or connect power.
The main ON/OFF switch is not turned ON.
Turn the appliance off by pressing the button.
The infuser cannot be extracted The appliance has not been switched OFF correctly.
Turn the appliance off by pressing the button.
The appliance requires a third rinse
cycle at the end of descaling
The water tank was not lled to the MAX level. Empty the drip tray.
Follow the instructions displayed by the appliance and
perform a third rinse cycle.
The appliance emits noises or small
puffs or steam while not in use
The appliance is ready for use or has been recently
switched OFF.
Condensate is dripping into the vaporizer.
This is normal.
To limit this, empty the drip tray.