Installation guide

4
INSTALLATION REQUIREMENTS
Tools and Parts
IMPORTANT:
■ Installer: Leave Installation Instructions with the homeowner.
■ Homeowner: Keep Installation Instructions for future
reference. Save these Installation Instructions for the local
electrical inspector’s use.
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Parts Needed
■ #8 x 3" (7.6 cm) wood screws (longer screws may be needed) (6)
■ 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood board(s) (1 or 2)
■ If you are connecting the water line directly to copper tubing
and not to a shutoff valve, you need a ferrule, a union, and a
¹⁄₄" compression fitting.
36" MODELS 42" FRENCH DOOR MODELS
Euro-Style Design
Features stainless steel wrapped doors with towel bar handles.
JB36SSFXRA JB36SSFXLA
Euro-Style Design
Features stainless steel wrapped doors with towel bar handles.
JF42SSFXDA
■ Cordless drill ■ Torx
®†
T15 and T27 screwdrivers
■ Drill bits ■ ¹¹⁄₃₂" nut driver
■ Adjustable
wrenches (2)
■ ³⁄₈", ¹⁄₄", and ¹⁄₂" open-end
wrenches
■ Phillips screwdriver ■ ⁵⁄₃₂" hex key
■ Small level ■ ¹⁄₄" and ⁵⁄₁₆" socket drivers
■ Appliance dolly ■ Tape measure
■ Utility knife
†®TORX is a registered trademark of Saturn Fasteners, Inc.