User's Manual

12
Tipping Radius
Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
■ The dolly wheel height must be added to the tipping radius
when a dolly is used.
■ If needed, the tipping radius can be reduced. See “Reduce
Tipping Radius.”
NOTE: Tip on side only.
Side Tipping Radius (36" [91.4 cm] Models)
Side Tipping Radius (42" [106.7 cm] Models)
Door Swing Dimensions
The location must permit both doors to open to a minimum of 90°.
Allow 4¹⁄₂" (11.4 cm) minimum space between the side of the
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using custom
wood overlay panels, custom handles, or extended handles.
Cabinet and Panel Installation Options
Cabinet Depth - 25" (63.5 cm)
Framed Cabinetry
Top View
A. 88 ⁷⁄₈ " (225.7 cm)
A. 91
³⁄₈ " (232.1 cm)
A
A
Model A B C D
36 58 ³⁄₄"
(149.2 cm)
56 ⁵⁄₈"
(143.8 cm)
56 ⁵⁄₈"
(143.8 cm)
58 ³⁄₄"
(149.2cm)
42 44"
(111.8 cm)
42 ³⁄₄"
(108.6 cm)
42 ³⁄₄"
(108.6 cm)
44"
(111.8 cm)
A. Refrigerator door
B. Overlay panel
C. Side trim
D. Adjacent cabinet
E. Grille bracket
90˚
110˚
110˚
90˚
BA C D
A B
E
D
C