Manual

CARE CLEANING
Self-Clean Oven
To set Self-Clean:
1. Press Clean pad.
2. REMOVE RACKSwill be displayed. Remove the racks.
3. Select CONTINUE using the Quickset pad. Tile Quickset
pads are located on either side of the control panel display.
4. Set LIGHT soil level by entering 200 using the number pads
for two hours of cleaning time. Press tile Enter pad.
OR
Select MEDIUM for a moderately soiled oven and three
hours of cleaning time.
Tile self-clean cycle uses above-normal cooking temperatures
to automatically clean the oven interior.
The oven should be cleaned regularly by wiping up spillovers
to prevent excessive smoke and flare-ups. Do not allow a
heavy build-up of soil to accumulate in tile oven.
During tile cleaning process, tile kitchen should be well
ventilated to get rid of normal odors associated with cleaning.
Before Self-Cleaning
1. Turn off tile oven light before cleaning. The oven light may
burn out during tile clean cycle.
2. Remove broiler pan, all pans, and oven racks from the
oven. The oven racks will discolor and may not slide easily
after a self-clean cycle if they are
not removed.
3. Clean oven frame, door frame, area
outside of gasket, and around the
opening in the door gasket with a
nonabrasive cleaner such as Bon
Ami* or detergent and water. Tile
self-cleaning process does not clean these areas. They
should be cleaned to prevent soil from baking on during
tile clean cycle. (The gasket is tile seal around tile oven
door and window.)
4. To prevent damage, do not clean or rub the gasket around
tile oven door. Tile gasket is designed to seal in heat
during the clean cycle.
5. Wipe up excess grease or spill-overs from the oven
bottom. This prevents excessive smoking, flare-ups or
flaming during the clean cycle.
OR
Select HEAVY for a heavily soiled oven and four hours of
cleaning time.
5. CLEAN, TIME, LOCKED and tile cleaning time countdown
will be displayed while the oven is cleaning. OVEN
COOLING will appear in tile display when the cleaning
time has been completed and tile oven is still locked.
Important: Tile door lock will disengage approximately one
hour after the cleaning time is completed. OVEN COOLING
will go off in tile display when the oven door has unlocked.
To Delay a Self-Clean Cycle:
1. Press Clean pad. / ....................\
2. REMOVERACKS will be displayed. Clean ,
'\ J
Remove the racks. .................
3,
4.
Select CONTINUE using the Quickset pad.
Set LIGHT soil level by entering 200 using the number
pads for two hours of cleaning time. Press the Enter pad.
OR
Select MEDIUM for a moderately soiled oven and three
hours of cleaning time.
OR
Select HEAVY for a heavily soiled oven and four hours of
cleaning time.
The door will lock. CLEAN, TIME, LOCKEDand the
cleaning time countdown will be displayed
6. Wipe up sugary and acidic spillovers such as sweet
potatoes, tomato, or milk-based sauces. Porcelain enamel
is acid-resistant, not acid-proof. Tile porcelain finish may
discolor if acidic or sugary spills are not wiped up before a
self-clean cycle.
6. After door locks, press the More Options pad.
7. Select DELAY using the Quickset pad.
8. Select the number of hours you want to delay tile start of the
self-clean cycle.
9. The delay time and cleaning time will be displayed.
* Brand names for cleaning products are registered trademarks of the respective manufacturers.
5