Technical Specifications

Important Legal Information -- Please read this carefully. It affects your rights.

This Limited Warranty document sets forth our maximum liability for our products. We shall not be liable for special, indirect,

consequential, or incidental damages. Your sole and exclusive remedy with respect to any and all losses or damages resulting from any

cause whatsoever shall be as speci ed above. We make no other warranty or guarantee, either express or implied, including implied

warranties of merchantability and  tness for a particular purpose to the original purchaser or to any subsequent user of the Product,

except as expressly contained herein. In the event state or provincial law precludes exclusion or limitation of implied warranties, the

duration of any such warranties shall be no longer than, and the time and manner of presenting any claim thereon shall be the same as,

that provided in the express warranty stated herein. This Limited Warranty document gives you speci c legal rights, and you may have

other rights that vary from state/province to state/province.

Any dispute, controversy or claim arising out of or relating to this warranty, any alleged breach thereof, or the use or sale of the products

to which this warranty applies shall be resolved by mandatory and binding arbitration administered by the American Arbitration

Association in accordance with its commercial arbitration rules. Original purchaser agrees that they may assert claims against JELD-WEN

in their individual capacity only, and not as a plaintiff or class member in any purported class action proceeding. Rejection of these

dispute resolution provisions must be sent to JELD-WEN at the address provided herein within thirty (30) days of original purchaser’s

receipt of the Products to which this warranty applies.

No distributor, dealer or representative of JELD-WEN has the authority to change, modify or expand this warranty. The original purchaser

of this Product acknowledges that they have read this warranty, understand it and are bound by its terms and agrees to provide this

warranty to the original owner of the structure into which the Product is installed.

“JELD-WEN Products” shall refer to window and patio door products (except United Collection products) manufactured in the United

States and/or Canada and marketed under the JELD-WEN brand name for use in the United States and/or Canada. See our separate United

Collection warranty, or our Export Warranty for applicable coverage on products used outside the United States and Canada.

“Skilled labor” refers to tasks where specialized technical knowledge, experience, methods or tools are required to properly identify,

diagnose and/or correct product-related problems.

“Chalking” of the exterior  nish is not a defect unless it exceeds a numerical rating of eight (8) when measured in accordance with the

standard procedures speci ed in ASTM D4214. Fading or changing in color of the exterior  nish is not a defect unless it exceeds  ve (5)

E units, calculated in accordance with ASTM D2244, paragraph 6.2. Color change shall be measured on an exposed area of  nish that has

been cleaned of surface soils and chalk, and the corresponding values measured on the original or unexposed area of  nish. Fading or

color changes may not be uniform if the surfaces are not equally exposed to the sun and elements. If the above ASTM standards change,

the standard in effect at the time of purchase applies. As an option to replacement, we may choose to re nish the product.