Dimensions Guide

Architectural Detail Manual
November 2010
JELD-WEN reserves the right to change specifications without notice.
Pa
g
e5-2
PRODUCT SPECIFICATIONS
MATERIALS
Extruded vinyl profiles comply with the performance requirements of
AAMA 303. The colors extend through the profile of the extrusion
with White and Desert Sand colors available.
FRAME
All frames andsash are assembled utilizing fusion-welded technology
for added strength and durability. The frame jamb width is 3- 1 /1 6”
(77.79mm), and the nominal extrusion exterior wall thickness is
0.060”. The wall depth of the single- hung product is 1-29/32”. The
frame incorporates a traditional brickmould profile with an integral
j-channel and nailing fin. Weep holes are included on the frame to
ensure standing water is directed to the exterior plane of the unit.
An interior accessory groove is standard to accommodate various
frame accessory and assembly options on the product.
SASH
The tilt sash is 1-3/8” (35.18mm) nominal thickness and is assembled
using fusion-welding technology for addedstrengthanddurability.
The sash also uses a steel reinforcement bar in the horizontal meeting
rails for additional strength. The fixed upper glass is direct set into
the unit frame.
GLAZING
3/4” (19mm) insulating glass consists of two lites of glass sealed
around a spacer. The glass is mounted into the sash using a
silicone-glazing compound. The insulating glass units comply with
the performance requirements of the IGCC in accordance with either
ASTM E774 or E2190. All units except the brickmould product are
exterior glazed.
GLAZING OPTIONS
3/4” (19mm) insulated glass is available in clear, Low- E or Low-E 366,
tinted, obscure, or other specialty insulating glass as specified. Many
glass options are available in tempe red glazing. A single use
reglazable drywall unit option is available, allowing the user to
remove the upper glass and meeting rail.
WEATHER-STRIPPING
Afin-pileweather-stripisappliedalongdualperimetersofthe
operating sash. The meeting rails utilize an integral extruded
interlock to provide exceptional performance.
HARDWARE
The exclusive WEN-Lock
TM
with visible latch indicator or a single
action cam style lock is available on all windows. Block and tackle
balance systems are utilized to support the vertical operation of the
sash. L ow profile thumb latches (sash retainers) and pivot pins are
equipped for utilization of the “tilt” function.
INSECT SCREENS
The optional fiberglass charcoal color insect screen is set in an
aluminum frame to match the color of the unit. The screen is secured
to the window using a pin and spring loaded plunger system. Insect
screens are intended to allow air and light in and to keep insects out.
They are not intended to keep anyone or anything from falling
through an open door or window. For safety screens or other security
devices contact your local building supply retailer.
GRILLES
GBG (Grilles between the Glass) - 5/8” (16mm) and 7/8” (22.2mm) flat
or 1” (26mm) contour grilles mounted between the glass panes
suspended within the air cavity and color matched to the extrusion
color.
SDL (Simulated Divided Lite) - 7/8” (22.2mm) color-matched contour
muntins surface mounted on the exterior surfaces of the insulated
glass unit to provide a true divided lite appearance.
EXTENSION JAMBS
Extension jambs are regionally available for JELD-WEN Vinyl
products. The 4-9/16” and 6-9/16” extension jambs are available in
pine clear vinyl wrapped, primed wood, red oak and maple finishes
and can be specified on three or four sides of the product.
ADDITIONAL ACCESSORIES
Additional accessories are available for JELD-WEN Vinyl products.
Please contact your local building supply retailer for a complete
listing of the additional accessories.
INSTALLATION
Installation per JELD-WEN Installation Method for Vinyl Windows
JII001, JII010 or JII011. See www.jeld-wen.com/resources for
instructions.
PERFORMANCE
NFRC Certified -(ratedandlabeledinaccordancewithNFRC)
AAMA/WDMA/CSA 101/I.S.2/A440
R20-DP rated
Optional DP-35 and DP-50 ratings are available
Single-Hung Tilt Windows
Brickmould Vinyl