Instructions / Assembly

Installation Instructions
for Genius
®
ZigZag1 Retractable Screen System (JII-90043)
5
During Step 3, DO NOT open the Screen Cassette Assembly and expose the screen fabric. Position the Screen Cassette Assembly in the Top
Guide and on the Bottom Guide with the sticker towards the top and the inside. Remove the top and bottom outer wrapping. Push the Screen Cassette
Assembly all the way to the right of the opening as viewed from the inside and snap it into the Side Guide (3A below). Next, remove the tape from the
cords and grasp the left Magnet Prole and carefully pull it to the left side of the opening. Ensure none of the cords are tangled, twisted, or pass over
each other, then snap it into the left Side Guide (3B below).
3A
3B
INSTALL CASSETTE ASSEMBLY
3